parts catalog

FILM-IDENTIFICATION 5088949 - Caterpillar

5088949 FILM-IDENTIFICATION Caterpillar parts FILM
Alternative (cross code) number:
Caterpillar 5088949 FILM-IDENTIFICATION

Buy FILM-IDENTIFICATION 5088949 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2
  For full view, you need register


1. Start the machine and move it forward or to the rear until drain plug (1) is in the position as shown.2. Drain the oil from the final drive. 3. Remove the nuts (2), then remove cover assembly (3) from the carrier. 4. Remove O-ring seal (4) from the cover assembly. Remove four bolts (6) then remove plate (5) from the cover. 5. Install a 1/2"-13 NC forged eyebolt (7) in the end of the drive axle. Pull axle out of carrier housing approximately 22 in. (55.9 cm). 6. Fasten straps and a hoist to the drive axle (8). Remove drive axle from the housing. Weight of the housing is 85 lb. (39 kg). If the axle can not be removed, move the machine a small amount to the front or rear until the axle can be pulled from the final drive. 7. Remove ring (10), gear (11) and spacer (9) from the axle.Install Drive Axles (825C, 826C)
1. Make sure the axles are clean and free of dirt or foreign material. 2. Fasten straps and a hoist to the drive axle (1). Put drive axle in position in the final drive. Install spacer on drive axle. 3. Install gear (2) half way on the axle.4. Put a piece of pipe (3) which has a 2 in. (5.1 cm) outside diameter and is 24 in. (61.0 cm) long in the end of gear (2) as shown. Push down on the pipe and slide the drive axle into position. 5. Push gear (2) all the way on the axle. Install ring (4) on the axle. 6. Install plate (7) with the four bolts (5) that hold it.7. Put clean oil on O-ring seal (6), then install the O-ring seal on the cover. 8. Install cover (8) on the final drive carrier with the nuts that hold it.9. Fill the final drives with oil to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.

Caterpillar parts catalog:

Caterpillar parts catalog
D3K2 Small Track Type Tractor FT300001-UP (MACHINE) POWERED BY C4.4 Engine
D5K2 XL & D5K2 LGP Small Track Type Tractor WT300001-UP (MACHINE) POWERED BY C4.4 Engine
D4K2 XL & D4K2 LGP Small Track Type Tractor MT300001-UP (MACHINE) POWERED BY C4.4 Engine

Parts film Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.