AVSPARE.COM
parts catalog

FILTER GP-ENGINE OIL 2278070 - Caterpillar



2278070 FILTER GP-ENGINE OIL Caterpillar parts 325C FILTER
Rating:
37
Alternative (cross code) number:
CA2278070
227-8070
2278070
Caterpillar 2278070 FILTER GP-ENGINE OIL

Buy FILTER GP-ENGINE OIL 2278070 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2278070:

EXCAVATOR  325C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 7 g01360266
Use Tooling (A) to raise the track assembly. Use suitable blocking in order to support the track assembly. Remove Tooling (A).
Illustration 8 g02923117
Loosen bolts (3).
Illustration 9 g02923121
Attach a suitable lifting device to Tooling (B). Position Tooling (B) under track carrier roller (4). The weight of the track carrier roller (4) is approximately 25 kg (55 lb).
Use Tooling (B) in order to remove track carrier roller (4). Installation Procedure
Table 6
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
B 183-4795 Roller Lifting Fork 1 Note: Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 10 g03683880For D5K2 machines with two carrier roller mounting locations, use REAR four mounting holes to locate the track carrier roller (X) on the SystemOne undercarriage. Refer to Illustration 10
Illustration 11 g03683883For D5K2 machines with two carrier roller mounting locations, use FORWARD four mounting holes to locate the track carrier roller (X) on the SALT undercarriage. Refer to Illustration 11.
Illustration 12 g02923121
Attach a suitable lifting device to Tooling (B). Position Tooling (B) under track carrier roller (4). The weight of the track carrier roller (4) is approximately 25 kg (55 lb).
Use Tooling (B) in order to install track carrier roller (4). Center track carrier roller (4) between the rails.
Remove Tooling (B).
Illustration 13 g02922641
Illustration 14 g03743317
Use the following measurements in order to position the track carrier roller properly:
Dimension (X) should measure 75.1 mm (2.96 inch).
Dimension (Y) should measure 140.9 mm (5.55 inch) for the D3K and D4K SALT.
Dimension (Y) should measure 161.2 mm (6.35 inch) for the D5K Systemone.
Dimension (Y) should measure 166.2 mm (6.54 inch) for the D5K SALT.
Illustration 15 g02923117
Tighten bolts (3).
Illustration 16 g01360266
Raise the track assembly with Tooling (A). Remove suitable blocking. Remove Tooling (A).
Illustration 17 g02725330
Turn relief valve (2) clockwise in order to close relief valve (2).
Adjust the track assembly. Refer to Operation and Maintenance Manual, "Track -Check/Adjust".
Illustration 18 g01360245
Install access cover (1).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
325C LCR Mobile Hydraulic Power Unit BKW00001-UP (MACHINE) POWERED BY 3126B Engine


Parts filter Caterpillar catalog:

1749570 FILTER GP-WATER SEP & FUEL
120H, 120K, 120K 2, 120M, 12H, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 14M, 160K, 160M, 16M, 2290, 2390, 2391, 2470C, 2491, 24M, 2590, 311D LRR, 3126, 3126B, 312C L, 312D, 312D L, 314D CR, 314D LCR,...
1589005 FILTER GP-OIL
320C, 320C FM, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH
6I2503 FILTER ELEMENT AS-AIR
235C, 30/30, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E,...
1R0770 FILTER AS-WATER SEP & FUEL
322C, 325C, 325D L, 330C, 330C L, 330D L, 570B, 580B, 924H, 928HZ, 938G II, 980G II, C6.6, D6N, D6R II, D6R III
2931183 FILTER GP-CAB AIR
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D, 319D L, 320C, 320C FM, 320D, 320D FM, 320D FM R...
2931184 FILTER ELEMENT-CAB AIR
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D, 319D L, 320C, 320C FM, 320D, 320D FM, 320D FM R...
1858154 FILTER ELEMENT-CAB AIR
1090, 1190, 1190T, 1290T, 312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH, 533, 543, HA770, HA771, HA870, HA871, M313C, M315C, M316C...
2299047 FILTER ELEMENT-CAB AIR
308C, 314C, 321C, 321D LCR, 325C, 328D LCR
2844568 FILTER ELEMENT-CAB AIR
308C, 308D, 314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.