AVSPARE.COM
parts catalog

FILTER GP-ENGINE OIL 3599837 - Caterpillar



3599837 FILTER GP-ENGINE OIL Caterpillar parts C175-16 FILTER
Rating:
26
Alternative (cross code) number:
CA3599837
359-9837
3599837
Caterpillar 3599837 FILTER GP-ENGINE OIL

Buy FILTER GP-ENGINE OIL 3599837 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 3599837:

GENERATOR SET  C175-16   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove" for the correct procedure.
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine should be mounted on a suitable stand and placed in the inverted position.
Illustration 1 g02311154
Remove thrust washer (1) from the cylinder block. Do not remove dowel (2) from the cylinder block unless the dowel is damaged. Note: The thrust washer has one Slots (X).
Illustration 2 g03449856
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (3) from the cylinder block.
If necessary, remove key (4) from camshaft (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the camshaft and the thrust washer. Inspect the camshaft and the thrust washer for wear and for damage. Refer to Specifications, "Camshaft" for more information. Replace any components that are worn or damaged.
Clean the camshaft bearing in the cylinder block. Inspect the camshaft bearing for wear and for damage. Refer to Specifications, "Camshaft Bearings" for more information. If necessary, replace the camshaft bearing. Refer to Disassembly and Assembly, "Camshaft Bearing - Remove and Install".
Replace all lifters when a new camshaft is installed.
Inspect the lifters for wear and for damage. Refer to Specifications, "Lifter Group" for more information. Replace any lifters that are worn or damaged. Refer to Disassembly and Assembly, "Lifter Group - Remove and install" for the correct procedure.
Illustration 3 g03449856
If necessary, install a new key (4) into camshaft (3).
Lubricate the bearing surfaces of camshaft (3) and lubricate the lobes of the camshaft with clean engine oil.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully install camshaft (3) into the cylinder block.
Illustration 4 g02311154
Lubricate the thrust washer with clean engine oil. Align Slot (X) in thrust washer (1) with dowel (2) in the cylinder block. Install thrust washer (1) into the recess in the cylinder block. Note: The thrust washer has one Slots (X).End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install" for the correct procedure.
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Install" for the correct procedure.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts filter Caterpillar catalog:

4N5834 FILTER-FOAM
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215C, 235, 235B, 235C, 235D, 330, 330 L, 3304, 3304B, 3306, 3...
1R0756 FILTER ELEMENT-FUEL
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, PM3508, PM3512, PM3516, PP3516, TH48-E80, XQC1200, XQC1600
1R0755 FILTER-FUEL
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5130, 5130B...
1281112 FILTER ELEMENT-AIR
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C32, G3512E, G3516, G3516B, G3516C, G3516E, G3520B, G3520C, G3520E, PM3512, PM3516, PMG3516, PP3516, SR4B
1R0766 FILTER ELEMENT-FUEL
3606, 3608, 3612, 3616, 3618, C175-16, C280-12, C280-16, C280-6, C280-8
1059741 FILTER ELEMENT AS-AIR
3606, 3608, 3612, 3616, C175-16, C280-12, C280-16, C280-6, C280-8, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, G3606, G3606B, G3608, G3612, G3616
2697041 FILTER ELEMENT AS-AIR
3512C, C175-16, C175-20, C32, TH48-E80
2804180 FILTER ELEMENT AS-AIR
C175-16, C175-20, G3512B, G3512E, G3520B
2089066 FILTER ELEMENT AS-AIR
3512B, 3512C, 3516B, 3516C, C175-16, C175-20, C27, C32, PM3516, TH48-E80, XQC1600
3601595 FILTER AS-FUEL
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.