FILTER & LINES GP-FUEL 3844189 - Caterpillar

Removal Procedure
Start By:
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02710322
Typical example
If necessary, remove bolts (1) and remove engine lifting bracket (2).
Remove bolt (4) and remove idler pulley (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components of the idler pulley are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g02710444
Typical example
Install bolts (4) to idler pulley (3). Position idler pulley (3) onto the cylinder head.
Tighten bolt (4) to a torque of 40 N m (30 lb ft).
If necessary, install bolts (1) to engine lifting bracket (2). Position the engine lifting bracket onto the idler pulley.
Tighten bolt (1) to a torque of 40 N m (30 lb ft). End By:
Install a new alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.