parts catalog

FILTER, OIL 7082860C1 - Caterpillar

7082860C1 FILTER, OIL Caterpillar parts FILTER
Alternative (cross code) number:
Caterpillar 7082860C1 FILTER, OIL

Buy FILTER, OIL 7082860C1 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 1
  For full view, you need register


Testing the Drive Loop Pressures
Park the machine on a level surface. Fully retract the boom and fully lower the boom. Move the transmission control to the NEUTRAL position and ensure that the parking brake is engaged.
Ensure that the machine is at operating temperature of approximately 60 °C (140°F). Shut of the engine.
Raise the machine and support the machine on tooling (H) in order to raise the tires above the surface of the ground.
Lower the guard for the sump.
Illustration 5 g00924911
Disconnect harness (1) from the potentiometer on the brake pedal.
Illustration 6 g00924930
Location of the test points on the piston pump (2) Piston pump (3) Test fitting (M2) (4) Test fitting(M1)
The forward pressure can be tested at test points (3) and (4). Remove the dust cap from test fitting (3) and (4) on the motor.
Remove the battery clamp. Turn the battery around 90 degrees. Pass tooling

Caterpillar parts catalog:

Caterpillar parts catalog

Parts filter Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.