AVSPARE.COM
parts catalog

FRAME GP-UPPER 3157122 - Caterpillar



3157122 FRAME GP-UPPER Caterpillar parts FRAME
Rating:
31
Alternative (cross code) number:
CA3157122
315-7122
3157122
Caterpillar 3157122 FRAME GP-UPPER

Buy FRAME GP-UPPER 3157122 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g02492036
Steering components (1) Pilot valve shaft. (2) Pilot valve. (3) Top yoke. (4) Steering column yoke. (5) Nut. (6) Steering wheel. (7) Steering shaft. (8) Keyway and key. (9) Shaft. (10) Steering stop bracket. (11) Bottom yoke. (12) Lever. (13) Bolt. (14) Forward set screw. (15) Rearward set screw. (16) Steering column shaft. (A) 6 1 mm (0.24 0.04 inch) dimension.
Illustration 2 g00866797
Steering frame lock is in the LOCKED position.
Stop the engine. Engage the parking brake. Move the steering frame lock to the LOCKED position.
Unbolt and disconnect steering shaft (7) from lever (12).
Unbolt and remove lever (12) from the shaft (9).
The keyway and the key (8) should be facing straight ahead. Install steering wheel (6) on the steering column shaft. The steering wheel must be installed in the straight ahead position. Install nut (5) that mounts the steering wheel. Torque the nut (5) to 50 4 N m (37 3 lb ft). The steering wheel, the keyway, and the key should be installed in the straight ahead position.
Install lever (12) onto shaft (9). Slide lever (12) over key (8) onto shaft (9) until shaft (9) extends 6 1 mm (0.24 0.04 inch) dimension (A) beyond the bottom of the lever (12). Bolt the lever (12) to shaft (9) with bolt (13).
Reconnect steering shaft (7) so that the end of shaft (9) extends through the pilot hole of top yoke (3) .Note: The steering wheel should be in the straight ahead position.
Bolt top yoke (3) to lever (12). Ensure that yoke (4) and shaft (9) are centered in the straight ahead position.


Parts frame Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.