AVSPARE.COM
parts catalog

FRAME GP-TELESCOPING RECOIL 9W0559 - Caterpillar



9W0559 FRAME GP-TELESCOPING RECOIL Caterpillar parts D7H FRAME
Rating:
61
Alternative (cross code) number:
CA9W0559
9W-0559
9W0559
Caterpillar 9W0559 FRAME GP-TELESCOPING RECOIL
Weight: 6905 pounds 3132 kg.

Buy FRAME GP-TELESCOPING RECOIL 9W0559 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 9W0559:

TRACK-TYPE TRACTOR  D7H   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Checking Face Runout Of The Flywheel1. Install the dial indicator as shown. Put a force on the flywheel toward the rear.2. Set the dial indicator to read 0.0 mm (.00 in).3. Turn the flywheel and read the indicator every 90°. Put a force on the flywheel to the rear before each reading.4. The difference between the lower and higher measurements taken at all four points must not be more than: Flywheel without BrakeSaver ... 0.15 mm (.006 in)Flywheel with BrakeSaver ... 0.30 mm (.012 in)This is the maximum permissible face runout (axial eccentricity) of the flywheel.Bore Runout (Radial Eccentricity) Of The Flywheel:
Checking Flywheel Bore1. Install the dial indicator (3) and make an adjustment of the universal attachment (4) so it makes contact as shown.2. Set the dial indicator to read 0.0 mm (.00 in).3. Turn the flywheel and read the indicator every 90°.4. The difference between the lower and higher measurements taken at all four points must not be more than: Flywheel without BrakeSaver ... 0.15 mm (.006 in)Flywheel with BrakeSaver ... 0.25 mm (.010 in)
Checking Flywheel Clutch Pilot Bearing Bore5. Runout (eccentricity) of the bore for the pilot bearing for the flywheel clutch, must not exceed: Flywheel without BrakeSaver ... 0.13 mm (.005 in)Flywheel with BrakeSaver ... 0.25 mm (.010 in)

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D7H & D7H LGP TRACTORS /DIFFERENTIAL STEERIN/ 4FG04000-UP (MACHINE) POWERED BY 3306 ENGINE
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 79Z04000-UP (MACHINE) POWERED BY 3306 ENGINE
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 4AB05500-UP (MACHINE) POWERED BY 3306 ENGINE


Parts frame Caterpillar catalog:

5G3443 FRAME GP-SLIDING
931B, 931C, 931C II, 935B, 935C, 935C II, D3B, D4B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.