0003641 GAGE Caterpillar parts GAGE
Alternative (cross code) number:
Illustration 1 g00789720
Use the ET to calibrate the left and right positions of the joystick. Calibration is required in the following situations:
The joystick is replaced or the joystick is serviced.
The Machine ECM is replaced or the ECM is removed for service.The ECM must detect the following conditions before starting the calibration procedure:
The engine is off.
There are No active diagnostic codes.If any of these conditions are not met during the calibration, the procedure is aborted immediately.Use the ET in order to calibrate the left and the right positions of the joystick. Select Service from the main menu. Then, select "CALIBRATION" from the drop-down menu. Select the Joystick from the selection menu. Follow the instructions that are provided.