parts catalog

GASKET 0005638 - Caterpillar

0005638 GASKET Caterpillar parts GASKET
Alternative (cross code) number:
Caterpillar 0005638 GASKET
Weight: 0.01 pounds 0 kg.

Buy GASKET 0005638 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01050006
Attach a suitable lifting device to tilt cylinder (4). The weight of tilt cylinder (4) is approximately 26 kg (58 lb). Install tilt cylinder (4) to the original location.
Install two spacers (13) that are located at the head end of tilt cylinder (4) on pin (11). One spacer is installed on the top side of tilt cylinder (4) and one spacer is installed on the bottom side of tilt cylinder (4) .
Install pin (11), retainer (12), and bolt (10) .
Illustration 2 g01050005
Install spacers (6), pin (8), retainer (7), and bolt (9) .
Illustration 3 g01050004
Illustration 4 g01050003
Connect hose assembly (5) and hose assembly (3). Remove the suitable lifting device from tilt cylinder (4) .
Illustration 5 g01050007
Install guard (1) and install bolts (2) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" and Operation and Maintenance Manual, "Capacities (Refill)".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.