AVSPARE.COM
parts catalog

GEAR 2H9127 - Caterpillar



2H9127 GEAR Caterpillar parts D337 GEAR
Rating:
37
Alternative (cross code) number:
CA2H9127
2H-9127
2H9127
Caterpillar 2H9127 GEAR
Weight: 2 pounds 1 kg.

Buy GEAR 2H9127 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 2H9127:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:

(1) Torque for bolts (32) ... 475 50 N m (350 37 lb ft)(2) Rubber toric seals, and all surfaces in contact with them, must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Put lubricant on all other seals at assembly.(3) (5), (10), (11), When heating bearings for installation, limit oil temperature to 120°C (250°F) and 8 hours maximum. Be sure that bearing is located against shoulder after it has cooled.(4), (8), Put 7M7260 Liquid Gasket on these surfaces before assembly.(7) Use 9S3263 Thread Sealant on 12 bolts.(9) Torque for bolts (18) ... 475 50 N m (350 37 lb ft)(12) Torque for bolts (48) ... 270 25 N m (200 18 lb ft)(14) Torque for bolts (18) ... 270 25 N m (200 18 lb ft)(15) Torque for bolts (four) ... 475 50 N m (350 37 lb ft)(16) Put 5P3931 Anti-Seize Compound on face and thread of nuts. Torque for nuts ... 300 55 N m (220 41 lb ft)Then tighten an additional ... 120°(17) Torque for bolts (six) ... 475 50 N m (350 37 lb ft)Adjustment Of Sprocket Bearings
1. Clean all parts and put SAE 30W oil on each part.2. Make sure that all parts, including sprocket hub (13) are installed correctly.3. Install plate (6) and all bolts (14).4. Slowly turn the sprocket hub and tighten all bolts (14) evenly.5. Tighten bolts (14) to a final torque of 270 25 N m (200 18 lb ft)

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455


Parts gear Caterpillar catalog:

1H1780 GEAR ASSEM.
12E, 1673, 1673B, 824, 955H, D330A, D330B, D333A, D337, D342, D342C, D4D, G342C
4F2290 GEAR
977D, D315, D326F, D337, D397D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.