AVSPARE.COM
parts catalog

GEAR-PLANETARY 3534891 - Caterpillar



3534891 GEAR-PLANETARY Caterpillar parts GEAR
Rating:
86
Alternative (cross code) number:
CA3534891
353-4891
3534891
Caterpillar 3534891 GEAR-PLANETARY
Weight: 6 pounds 3 kg.

Buy GEAR-PLANETARY 3534891 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 27
 
  For full view, you need register

Information:

The Pulse Width Modulated (PWM) sensors on the pavers are the Steering Wheel sensor, the Speed Dial sensor, the Speed Lever sensor and the Brake Pedal sensor. A PWM sensor produces a digital signal. The duty cycle of the digital signal varies as the condition changes and the frequency of the digital signal is constant.
Illustration 1 g01111831
Typical PWM square wave signals with duty cycles.
In the event that a calibration is performed and is not accepted, follow the procedure listed below.Test Step 1. Check PWM Calibration
Perform the calibration procedure that is documented in this manual for a particular PWM sensor. Expected Result:The calibration procedure has been accepted.Results:
OK - The calibration procedure has been accepted. There is no problem at this time.STOP
NOT OK - The calibration procedure has not been accepted.Repair: In order to calibrate Pulse Width Modulated (PWM) sensors, The duty cycle of the PWM signal must be within the valid operating range. The duty cycle of the PWM signal is the time period that the square wave signal is "HI" versus the time period that the square wave signal is "LOW" as shown in Figure 1. In all cases, the PWM sensor duty cycle must be less than 95 percent and greater than 5 percent in order for the calibration to be accepted. Ensure that the sensor is mounted properly. Ensure that the duty cycle is not outside of the acceptable duty cycle range for any of the extreme operating positions of the sensor.STOP

Caterpillar parts catalog:

Caterpillar parts catalog
745 Articulated Truck 3T600001-UP (MACHINE) POWERED BY C18 Engine
740EJ Articulated Truck 3T700001-UP (MACHINE) POWERED BY C18 Engine
745 Articulated Truck 3F600001-UP (MACHINE) POWERED BY C18 Engine
740 EJ Articulated Truck 3F700001-UP (MACHINE) POWERED BY C18 Engine
740 Articulated Truck 3T800001-UP (MACHINE) POWERED BY C15 Engine
740 Articulated Truck 3F800001-UP (MACHINE) POWERED BY C15 Engine
735C Articulated Truck TFJ00001-UP (MACHINE) POWERED BY C15 Engine
735C Articulated Truck LFJ00001-UP (MACHINE) POWERED BY C15 Engine
745C Articulated Truck TFK00001-UP (MACHINE) POWERED BY C18 Engine
745C Articulated Truck LFK00001-UP (MACHINE) POWERED BY C18 Engine
740C Ejector Articulated Truck TFN00001-UP (MACHINE) POWERED BY C18 Engine
740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 Engine


Parts gear Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.