AVSPARE.COM
parts catalog

GENERAL AR-GENSET 2332995 - Caterpillar



2332995 GENERAL AR-GENSET Caterpillar parts 3456 GENERAL
Rating:
17
Alternative (cross code) number:
CA2332995
233-2995
2332995
Caterpillar 2332995 GENERAL AR-GENSET

Buy GENERAL AR-GENSET 2332995 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 2332995:

GENERATOR SET  3456   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Release hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release" in this manual.
Illustration 1 g00357395
Turn the hex nut that is located at the bottom of the accumulator in order to remove accumulator (1). Remove the O-ring seal from the accumulator.Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: Check the condition of the O-ring seal prior to the installation of the accumulator. If the O-ring seal is worn or damaged, use a new part for replacement.
Illustration 2 g00357395
Install the O-ring seal on the accumulator. Install hydraulic accumulator (1) by turning the hex nut that is located at the bottom of the accumulator.Note: Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the proper filling procedure and the proper level for the hydraulic oil system.
Check the oil level in the hydraulic oil tank. Fill the hydraulic oil tank to the correct level.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts general Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.