parts catalog

GEROTOR 1246199 - Caterpillar

1246199 GEROTOR Caterpillar parts PF-300C, PS-300B GEROTOR
Alternative (cross code) number:
Caterpillar 1246199 GEROTOR
Weight: 2 pounds 0 kg.

Buy GEROTOR 1246199 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 1246199:

PNEUMATIC COMPACTOR  PF-300C   PS-300B   Caterpillar
Number on catalog scheme: 4
  For full view, you need register


Connectors for the Electronic Control Module (ECM)
Illustration 1 g06123997
Locations of the components on the engine ECM
(1) P2 ECM connector (harness side)
(2) P2 ECM connector (ECM side)
(3) Engine ECM
(4) P1 ECM connector (ECM side)
(5) P1 ECM connector (harness side)
Illustration 2 g06124000
Numbering arrangement of ECM connector pins
Terminal Removal
Table 1
Required Tools
Tool Part Number Part Description Qty
A 151-6320 Removal Tool (Red) 1
Illustration 3 g01877813
Removal Tool
Remove the connector from the ECM. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install".
Position Tooling (A) around wire (2).Note: Make sure that the tool stays perpendicular to the face of connector (1).
Push the tool into the hole for the terminal. Gently pull the wire to remove the terminal from the rear of connector (1).
Remove the Tooling (A) from the wire.Note: If a terminal must be replaced, part number 9X-3402 must be used for 16 and 18 AWG wire. Part number 126-1768 must be used for 14 AWG wire.Terminal Insertion
Push the terminal into the rear of connector (1) until the terminal engages with the locking device.
Gently pull on wire (2) to make sure that the terminal is retained by the locking device.
Connect the connector to the ECM and then tighten the retaining screw to a torque of 6 N m (53 lb in).Injector Connectors
Connectors at the Valve Cover
Illustration 4 g03745086Sensor Connectors
Analog Sensor Connector (active)
Illustration 5 g01240891Analog Sensor Connector (passive)
Illustration 6 g01241538Connectors for the Termination Resistor
Illustration 7 g01355248Engine Speed/Timing Connector
Illustration 8 g01155187Ampseal Connector (typical)
Illustration 9 g02219254Deutsch Connectors (typical)
Illustration 10 g02220494

Caterpillar parts catalog:

Caterpillar parts catalog
PS-300B PF-300B Pneumatic Compactor 4PN00001-00525 (MACHINE) POWERED BY 3054 Engine
PS-300B PF-300B Pneumatic Compactor 4PN00526-UP (MACHINE) POWERED BY 3054 Engine
PF-300C,PS-300C Pneumatic Compactor PFB00001-UP (MACHINE) POWERED BY 3054C Engine

Parts gerotor Caterpillar catalog:

1280318 GEROTOR
CB-434B, CB-434C, CB-534B, CB-534C, CB-634C
1022800 GEROTOR
16G, 16H, 16H NA, CB-434B, CB-534B, CB-535B, CB-634, RR-250, SS-250
1161431 GEROTOR
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
14G, 14H, 14H NA, AP-1000, AP-1000B, AP-800, AP-900B
AP-1000, AP-200, AP-200B
1698591 GEROTOR
CB-334D, CB-334E, CB-335D, RM-300, RM-350B, RM-500
1607743 GEROTOR AS
RM-250C, RR-250B
1566417 GEROTOR
10 FT, 10B, 8 FT
AP-1200, CP-433B, CS-533C, CS-563C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.