AVSPARE.COM
parts catalog

GUARD AS 1694893 - Caterpillar



1694893 GUARD AS Caterpillar parts D8R II GUARD
Rating:
63
Alternative (cross code) number:
CA1694893
169-4893
1694893
Caterpillar 1694893 GUARD AS

Buy GUARD AS 1694893 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 1694893:

TRACK-TYPE TRACTOR  D8R II   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 350-7768 Electric Hydraulic Pump Gp (115V) -1
350-7769 Electric Hydraulic Pump Gp(230V) -
4C-9634 Puller Stud 1
9U-6832 Nut 1
5P-8712 Bushing 1
316-1489 Double Acting Cylinder 1
134-8469 Spacer 1
9U-5338 Bearing Puller Adapter 1 Start By:
Remove the boom. Refer to Disassembly and Assembly, "Boom - Remove".
Illustration 1 g00479266
Remove lip seal (1).
Illustration 2 g00479267
Use Tooling (A) to remove the sleeve bearing.
Repeat Steps 1 through 2 to remove the lip seal and the sleeve bearing from the other side of the boom.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 1P-0520 Bearing and Seal Driver 1
C 5P-0960 Molybdenum Grease
Make sure that the bores for the sleeve bearings are free of paint and grease prior to the installation of the sleeve bearings. Coat the sleeve bearings and the bearing bores with Tooling (C) prior to the installation of the sleeve bearings in the bores. Sleeve bearings must be installed with the identification numbers toward the outside of the boom.Note: Make sure that the bearings are installed in the bore so that the identification numbers of the bearings are facing outward.
Illustration 3 g00599079
(X) Boom
(Y) Bearing
Lower the temperature of the sleeve bearings. Use Tooling (B) to install the sleeve bearing in the pin bore at the foot of the boom. Install the sleeve bearing until Dimension (a) is 9.5 0.8 mm (0.37 0.03 inch) below the outside surface of the boom.
Illustration 4 g00479266
Use Tooling (B) to install lip seal (1). Install the seal with the sealing lip toward the outside of the boom. Install the lip seal until the lip seal makes contact with the sleeve bearing.
Repeat Steps 2 through 3 to install the sleeve bearing and the lip seal on the other side of the boom.
Put a thin coat of Tooling (C) on the sleeve bearings. Put a thin coat of Tooling (C) on the lips of lip seals (1).End By:
Install the boom. Refer to Disassembly and Assembly, "Boom - Install".

Caterpillar SIS machinery equipment:

Caterpillar SIS
  • D8R Series II Track-Type Tractor 6YZ00001-UP (MACHINE) POWERED BY 3406E Engine » 169-4893 GUARD AS
  • D8R TRACK-TYPE TRACTOR Differential Steering AKA00001-UP (MACHINE) POWERED BY 3406E Engine » 169-4893 GUARD AS

Caterpillar parts catalog:

Caterpillar parts catalog
D8R Series II Track-Type Tractor 6YZ00001-UP (MACHINE) POWERED BY 3406E Engine
D8R TRACK-TYPE TRACTOR Differential Steering AKA00001-UP (MACHINE) POWERED BY 3406E Engine


Parts guard Caterpillar catalog:

1Z0746 GUARD GP-SEAL
D7H, D7R, D7R II, D8N, D8R, D8R II
1142033 GUARD AS-FAN
583R, D7R, D8R, D8R II
1912394 GUARD AS
572R, 572R II, 583R, 587R, D7R, D7R II, D8R, D8R II
7T4000 GUARD AS
D8N, D8R, D8R II
3679022 GUARD AS
D10R, D10T2, D11R, D11T, D8R, D8R II, D8T, D9R, D9T
3224989 GUARD AS
D8R, D8R II, D8T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.