AVSPARE.COM
parts catalog

GUARD AS 1694982 - Caterpillar



1694982 GUARD AS Caterpillar parts 973C GUARD
Rating:
43
Alternative (cross code) number:
CA1694982
169-4982
1694982
Caterpillar 1694982 GUARD AS
Weight: 39 pounds 17 kg.

Buy GUARD AS 1694982 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compatible equipment models: 1694982:

TRACK LOADER  973C   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:


Illustration 1 g00597019
(1) Diameter of the shaft at the seat area of the carbon seal assembly ... 44.450 0.020 mm (1.7500 0.0008 inch) (2) Seal assembly
Ring and water seal
Use the 8T-3034 Water Pump Seal Driver and hand pressure in order to install the water seal and the ring together in the pump housing bore. Ensure that the polished face of the ring is toward the groove of the seal assembly.
Seal assembly.
Remove the spring from the seat.
Put clean water on the seal assembly as the only lubrication for assembly. DO NOT get any grease or oil on the seal faces.
DO NOT stretch the rubber of the seal assembly at installation. If the seal is stretched, the service life is shortened.
Use the 8T-3034 Water Pump Seal Driver and hand pressure to install the seal assembly on the pump shaft until the seal face makes light contact with the smooth face of the ring.Note: The seal assembly must rotate with the water pump shaft. DO NOT use any lubricant (except clean water) that will reduce the friction between the seal and the shaft.
Install the carbon seal assembly spring. (3) Diameter of impeller shaft ... 64.850 0.020 mm (2.5531 0.0008 inch)Bore in bearing for impeller shaft ... 65.056 0.020 mm (2.5613 0.0008 inch) (4) Install the impeller shaft bearing to the following dimension from the surface of the pump housing. ... 2.500 0.500 mm (0.0984 0.0197 inch) (5) Install the impeller shaft support bearing to the following dimension from the surface of the support. ... 2.500 0.500 mm (0.0984 0.0197 inch) (6) Thickness of plate ... 11.85 0.05 mm (0.467 0.002 inch)Width of groove in impeller shaft for the plate ... 12.00 0.05 mm (0.472 0.002 inch)End play for impeller shaft ... 0.05 0.25 mm (0.002 0.010 inch) (7) Diameter of impeller shaft at the support end ... 44.880 0.020 mm (1.7669 0.0008 inch)Bore in shaft support bearing ... 45.056 0.020 mm (1.7739 0.0008 inch)

Caterpillar parts catalog:

Caterpillar parts catalog
973C Custom Parts Manual Track-Type Loader Steel Mill 3RZ00001-UP (MACHINE) POWERED BY 3306 Engine
973C Track-Type Loader Hydrostatic Drive 3RZ00001-UP (MACHINE) POWERED BY 3306 Engine


Parts guard Caterpillar catalog:

1293738 GUARD-STRIKER
416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F, 953C, 963C, 973C
2530064 GUARD
950H, 960F, 962H, 963B, 963C, 963D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M, 972M XE, 973, 973C, 973D
2530065 GUARD
950H, 960F, 962H, 963B, 963C, 963D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M, 972M XE, 973, 973C, 973D
2530066 GUARD-BUCKET CORNER
973C, 973D, 980C, 980G, 980G II, 980H, 980K, 980M, 982M, 988F II, 988G, 988H, 988K
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.