AVSPARE.COM
parts catalog

GUARD GP-VANDALISM 2333564 - Caterpillar



2333564 GUARD GP-VANDALISM Caterpillar parts AP-1055D, BG-2455D, BG-260D GUARD
Rating:
57
Alternative (cross code) number:
CA2333564
233-3564
2333564
Caterpillar 2333564 GUARD GP-VANDALISM

Buy GUARD GP-VANDALISM 2333564 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT PAVER,

Compatible equipment models: 2333564:

ASPHALT PAVER  AP-1055D   BG-2455D   BG-260D   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Keep engine speed low until the engine oil pressure registers on the gauge. If it does not register within 10 seconds, stop the engine and investigate the cause before starting again.
Pre - operation Warm up
The hydraulic activation lever must be down in the unlocked position, before the hydraulic controls will function. 1. Allow the engine to warm up at LOW IDLE for five minutes. The engine coolant temperature gauge pointer should be in the green range.When idling the engine for warm - up, observe the following recommendations: In temperatures above 0°C (32 °F), warm - up requires approximately 15 minutes.In temperatures below 0°C (32 °F), warm - up requires approximately 30 minutes or more.In temperatures below - 18 °C (0°F) or if hydraulic functions are sluggish, more time may be required.
The hydraulic control valve may become overheated if the bucket is operated continuously under relief conditions.Operate the control valve for ten to fifteen seconds and then return the control lever to the HOLD position for five to ten seconds.
2. To warm up the hydraulic oil, move the governor control lever to medium engine speed. Run the engine for about five minutes while intermittently holding the bucket control lever in the bucket dump position.3. Move the governor control lever to the maximum engine speed. Run the engine for an additional five minutes while intermittently holding the bucket control lever in the bucket dump position.This will allow the oil to reach relief pressure, which causes it to warm more rapidly.Cycle all controls to allow warm oil to circulate through all cylinders and lines. 4. Observe the gauges and indicators frequently during the operation. If the machine does not operate or travel in a straight line, contact your Caterpillar dealer.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
AP-1000D, BG-260D Asphalt Paver BPW00001-UP (MACHINE) POWERED BY C-7 Engine
AP-1055D, BG-2455D Mobil Track Asphalt Paver BXW00001-UP (MACHINE) POWERED BY C7 Engine
AP-1055D, BG-2455D Steel Track Asphalt Paver A6P00001-UP (MACHINE) POWERED BY C7 Engine


Parts guard Caterpillar catalog:

2587531 GUARD AS
2290, 2390, 2391, 2491, 2590, 3126B, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330C...
1996353 GUARD AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
1995823 GUARD AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP-800C, AP-800D, AP-900B, AP1000E, AP1055E, AP555E, BG-225B, BG-225C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, B...
1925432 GUARD AS
AP-1055D, AP-655C, BG-2455D, BG-260D
1925433 GUARD AS
AP-1055D, AP-655C, BG-2455D, BG-260D
2765454 GUARD AS-FAN
AP-1055D, BG-2455D, BG-260D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.