parts catalog

GUARD AS 3599418 - Caterpillar

3599418 GUARD AS Caterpillar parts GUARD
Alternative (cross code) number:
Caterpillar 3599418 GUARD AS

Buy GUARD AS 3599418 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Part Number Description
8 2N2766 LOCKNUT
4 6V3917 SEAL-O-RING
4 6V5103 SEAL-O-RING
2 1215736 GASKET-TURBO
4 3693229 PLATE-CLAMP
16 3693458 BOLT-HEX FLG HD
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
Update the turbine housing with different clamps and bolts. The new clamps and bolts provides a more secure joint between turbocharger cartridge and the turbine housing. Refer to the attached Rework Procedure.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-7500 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 6.0-hour job
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to Disassembly and Assembly, SENR6564.
1. Remove eight original 188-8617 High Temperature Bolts and two original 188-8618 Clamps from the turbocharger.
2. Separate the turbine housing from the rest of the turbocharger assembly.
3. Counter bore the eight clamp bolt holes in the turbine housing to a depth of 2.5 mm (0.098 inch). The counter bore diameter is 10 mm (0.394 inch). The counter bore can be machined with a 10 mm (0.394 inch) drill or an end mill with a 0.5 mm (0.0197 inch) corner radius.
4. Tap the eight clamp bolt holes with a 3/8 inch - 16 thread tap.
Reassemble the turbocharger using the new 369-3458 High Temperature Bolts and 369-3229 Clamps in place of the hardware removed in Step 1
Note: Apply 5P-3931 Anti-Seize Compound to the threads of the bolts prior to assembly.
5. Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".

Parts guard Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.