AVSPARE.COM
parts catalog

HARNESS AS 1246024 - Caterpillar



1246024 HARNESS AS Caterpillar parts 330 L HARNESS
Rating:
20
Alternative (cross code) number:
CA1246024
124-6024
1246024
Caterpillar 1246024 HARNESS AS

Buy HARNESS AS 1246024 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 1246024:

EXCAVATOR  330 L   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 1 g06355813
Illustration 2 g06346112
Detailed view of area A
Table 1
Item Qty Part Specification Description
1 1 - Torque to 50 10 N m (36.9 7.4 lb ft).
As required, use the thrust washers to obtain minimum gap between lift arm and frame center shift plates.
First shim shall be placed in rear of the joint. For any additional shims being used, split between the front and rear as best as possible
2 6 123-8187 Thrust Washer Thickness of one thrust washer is 1.0 mm (0.04 inch).
3 2 8D-4336 Thrust Washer Thickness of one thrust washer is 1.90 0.18 mm (0.075 0.007 inch).
Illustration 3 g06346115
Detailed view of area C
Table 2
Item Qty Part Specification Description
4 As required, use the shims to obtain maximum end play of 0.25 mm (0.010 inch). So yoke assembly will rotate without binding.
8 7D-8879 Shim Thickness of one shim is 0.13 mm (0.005 inch).
6 7D-8881 Shim Thickness of one shim is 0.25 mm (0.010 inch).
2 7D-8882 Shim Thickness of one shim is 0.51 mm (0.020 inch).
5 2 8D-8168 Bearing Bore before assembly is 63.65 0.05 mm (2.506 0.002 inch).
6 2 7D-8889 Bearing Bore before assembly is 76.352 0.050 mm (3.0060 0.0020 inch).
Illustration 4 g06346120
Detailed view of area C
Table 3
Item Qty Part Specification Description
7 2 8X-5108 Bushing Bore before assembly is 60.48 0.05 mm (2.381 0.002 inch).
8 1 8X-5107 Pin Diameter is 60.26 0.03 mm (2.372 0.001 inch).

Caterpillar parts catalog:

Caterpillar parts catalog
330, 330 L AND 330 LN EXCAVATORS 2EL00001-UP (MACHINE) POWERED BY 3306 ENGINE


Parts harness Caterpillar catalog:

5I8375 HARNESS AS
320, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 L
5I8216 HARNESS AS
311, 312, 315, 320, 320 L, 320N, 322, 325, 330, 330 L
7Y8105 HARNESS AS
311, 312, 315, 317, 320, 320 L, 320N, 322, 325, 325 L, 325 LN, 330, 330 L, 350, 375, 375 L, 5080
4I5493 HARNESS AS
311, 312, 315, 330, 330 L
1059912 HARNESS AS
325, 325 L, 325 LN
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.