HARNESS AS 1246355 - Caterpillar

Do not use propylene glycol in concentrations that exceed 50 percent glycol because of the reduced heat transfer capability of propylene glycol. Use ethylene glycol in conditions that require additional protection against boiling or freezing.
Table 6
Propylene Glycol    
Concentration    Freeze Protection    Anti-Boil Protection    
50 Percent    
−29 °C (−20 °F)    
106 °C (223 °F)    To check the concentration of glycol, use the 1U-7298 Coolant/Battery Tester (Degrees Celsius) or use the 1U-7297 Coolant/Battery Tester (Degrees Fahrenheit). The testers give readings that are immediate and accurate. The testers can be used with ethylene or propylene glycol.Coolant Recommendations
Do not use a commercial coolant/antifreeze that only meets the ASTM D3306 specification. This type of coolant/antifreeze is made for light duty automotive applications.
The following two coolants are used in Caterpillar diesel engines:Preferred - Caterpillar Extended Life Coolant (ELC) or a commercial extended life coolant that meets the Caterpillar EC-1 specificationAcceptable - Caterpillar Diesel Engine Antifreeze/Coolant (DEAC) or a commercial heavy-duty antifreeze/coolant that meets "ASTM D4985", or "ASTM D6210" specificationsCaterpillar recommends a 1:1 mixture of water and glycol. This mixture of water and glycol will provide optimum heavy-duty performance as an antifreeze/coolant.Note: Caterpillar DEAC does not require a treatment with an SCA at the initial fill. A commercial heavy-duty antifreeze/coolant that meets "ASTM D4985" or "ASTM D6210" specifications MAY require a treatment with an SCA at the initial fill. These coolants WILL require a treatment with an SCA on a maintenance basis.Refer to Special Publication, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations" for additional information that relates to coolant.S O S Coolant Analysis
Table 7
Recommended Interval    
Type of Coolant     Level 1     Level 2    
DEAC     Every 250 Hours     Yearly (1)    
ELC     Not Required     Yearly    
( 1 ) The Level 2 Coolant Analysis should be performed sooner if a problem is identified by a Level 1 Coolant Analysis.S O S Coolant Analysis (Level 1)A coolant analysis (Level 1) is a test of the properties of the coolant.The following properties of the coolant are tested:
Glycol concentration for freeze protection and boil protection
Ability to protect from erosion and corrosion
pH
Conductivity
Visual analysis
Odor analysisThe results are reported, and appropriate recommendations are made.Refer to the Maintenance Interval Schedule in this Operation and Maintenance Manual, "Cooling System Coolant Sample (Level 1) - Obtain"