AVSPARE.COM
parts catalog

HARNESS AS-ENGINE 2333093 - Caterpillar



2333093 HARNESS AS-ENGINE Caterpillar parts C9 HARNESS
Rating:
80
Alternative (cross code) number:
CA2333093
233-3093
2333093
Caterpillar 2333093 HARNESS AS-ENGINE
Weight: 2 pounds 1 kg.

Buy HARNESS AS-ENGINE 2333093 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2333093:

TRUCK ENGINE  C9   Caterpillar
Number on catalog scheme: 6
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 350-7768 Electric Hydraulic Pump Gp (115V) 1
350-7769 Electric Hydraulic Pump Gp (230V) 1
6V-3175 Double Acting Cylinder 1
6V-4035 Sleeve 1
4C-9634 Puller Stud 1
7H-7539 Full Nut 1
1P-1836 Bearing Puller Adapter 1
Illustration 1 g06241280
Extend the grapple arch and position the grapple on suitable cribbing, as shown.
Release the hydraulic system pressure.
Illustration 2 g06241285
Position suitable cribbing under grapple tong cylinder (1).
Illustration 3 g06241288
Illustration 4 g06241289
Remove bolt (3) and pin assembly (2).
Repeat Steps 3 and 4 for the other side.
Retract grapple tong cylinder (1) and install pin assembly (2) and bolt (3) on both sides.
Attach a suitable lifting device to pin assembly (2), as shown. The weight of grapple tong (5) is approximately 272 to 363 kg (600 to 800 lb).
Note the location and the quantity of shims (4) for installation purposes.
Illustration 5 g06241290
Typical Example
Illustration 6 g06241292
Remove bolt (6), plate (7), and shims (8).
Remove bolt (9) and retract pin assembly (10) for a distance of 280 mm (11.0 inch).
Use the suitable lifting device to remove the grapple tong.
Illustration 7 g06241294
Illustration 8 g06241296
Remove seal (11).
Use Tooling (A) to remove bearings (12) from grapple tong (5).
Repeat Steps 6 through 13 for the other grapple tong.Installation Procedure
Install grapple tong (5) in the reverse order of removal.

Caterpillar parts catalog:

Caterpillar parts catalog
C9 Military Vehicle Engine CKP00001-UP
C9 Romania Power Pack SRB00001-UP


Parts harness Caterpillar catalog:

4190841 HARNESS AS-ENGINE
140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 5...
2153249 HARNESS AS-ENGINE
12H, 140M, 140M 2, 160M, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 511, 521, 521B, 522, 522B, 532, 541, 541 ...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.