AVSPARE.COM
parts catalog

HARNESS AS. 2333748 - Caterpillar



2333748 HARNESS AS. Caterpillar parts HARNESS
Rating:
11
Alternative (cross code) number:
CA2333748
233-3748
2333748
Caterpillar 2333748 HARNESS AS.
Weight: 0.50 pounds 0 kg.

Buy HARNESS AS. 2333748 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g00510186
Remove check valve (1) and connector (3) from brake valve (2).
Illustration 2 g00485264
Remove O-ring seal (4) from check valve (1).
Illustration 3 g00485266
Remove two locking bolts (5) and the hard washers. Remove air cylinder (6) and the O-ring seal from brake valve (2).
Illustration 4 g00485320
Illustration 5 g00572404
Use a suitable screwdriver (not shown) in order to remove snap ring (7) from air cylinder (6).
Remove head (10) from air cylinder (6).
Remove seal (12) from head (10).
Remove piston (9) from air cylinder (6).
Remove seal (8) and seal (11) from piston (9).
Illustration 6 g00714837
Remove lip seal (13) from head (10).
Illustration 7 g00573547
Illustration 8 g00573549
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove O-ring plug (14), the O-ring seal, spring (17) and four shims (16) from brake valve (2).
Remove spool (15) from brake valve (2).
Illustration 9 g00573550
Illustration 10 g00573551
Remove relief valve (18) and O-ring plug (19) from brake valve (2).
Illustration 11 g00573552
Remove cap (20), gasket (21), nut (22) and gasket (23) from relief valve (18).
Remove O-ring seal (24), (25) and (26) from relief valve (18).
Illustration 12 g00573593
Illustration 13 g00573594
Remove check valve (27) from brake valve (2).
Illustration 14 g00573596
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove O-ring plug (34), O-ring seal (32), spring (31), dowel (33) and valve (30) from check valve (27).
Remove O-ring seal (28) and (29) from check valve (27).


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.