HARNESS AS-FRONT 3844055 - Caterpillar

Illustration 1 g03734645
Table 1
Specification for 459-9553 Hoe Stick Gp
Item Qty Part Specification Description
- All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 1 4I-4811 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
2 1 4I-4809 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
3 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
4 2 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 2 166-1494 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6 2 357-5709 Bushing(1) Bore before assembly is 90.385 0.030 mm (3.5585 0.0012 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 2 229-1096 Bushing(1) Bore before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 240-2913 Bushing(1) Bore before assembly is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushing in the bore so that the part number of the bushing is facing outward.