AVSPARE.COM
parts catalog

HARNESS AS-ENGINE 4645886 - Caterpillar



4645886 HARNESS AS-ENGINE Caterpillar parts HARNESS
Rating:
76
Alternative (cross code) number:
CA4645886
464-5886
4645886
Caterpillar 4645886 HARNESS AS-ENGINE

Buy HARNESS AS-ENGINE 4645886 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
 
  For full view, you need register

Information:


Illustration 189 g00748091
Install tapered plug (15) into modulating valve assembly (1) , if the tapered plug was removed from the modulating valve assembly at disassembly.Note: Apply 9S-3263 Thread Lock Compound to the threads before installing the plug.
Illustration 190 g00759427
Install the following items into modulating valve assembly (1) :
Pin (9)
Spring (10)
Spring (11)
Spring (12)
Accumulator valve (13)
O-ring seal (7)
Install plug (14) into modulating valve assembly (1) .
Repeat Step 3 for the components under the plug (8) on the modulating valve assembly (1) .
Illustration 191 g00759792
Install the following items into modulating valve assembly (1) :
Spool (3)
Spring (4)
O-ring seal (5)
Install plug (6) into modulating valve assembly (1) .
Repeat Step 6 for the components under plug (2) on the modulating valve assembly.Installation of the Control Valve
Table 13
Tools Needed    
Tool     Part Number     Name     QTY    
A     6L-4428     3/8-16 Guide Bolts     2    
Clean all parts and inspect all parts. If any parts are worn or damaged use new Caterpillar parts for replacement.
Illustration 192 g00747930
Install Tooling (A) into torque converter housing (3) and install gasket (6) .
Illustration 193 g00747929
Install modulating valve assembly (5) and install gasket (4) .
Illustration 194 g00747919
Place control valve assembly (2) in position. Then install seven mounting bolts (1) that secure the control valve to the torque converter housing.
Illustration 195 g00747866
Remove Tooling (A) and install two mounting bolts (1) that secure control valve (2) to converter housing (3) .Installation of the Charge Pump
Table 14
Tools Needed    
Tool     Part Number     Name     QTY    
A     (1)     7/16-14 x 5 Guide Bolts     2    
( 1 ) Make Tooling (A) from a suitable bolt.
Clean all parts and inspect all parts. If any parts are worn or damaged use new Caterpillar parts for replacement.
Illustration 196 g00747837
Install Tooling (A) into torque converter housing (3) . Then install gasket (4) and charge pump (2) .
Install the mounting bolts, which secure charge pump (2) to torque converter housing (3) .
Illustration 197 g00747403
Remove Tooling (A) and then install two mounting bolts (1) that secure charge pump (2) to torque converter housing (3) .End By: Install the turbine and impeller assemblies. Refer to Disassembly and Assembly, "Torque Converter - Assemble".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
G3516H Generator Set N1S00001-UP
G3516H Generator Set NWJ00001-UP
G3516H Generator Set NWH00001-UP
G3516H Generator Set ME300001-UP
G3516H Generator Set GLM00001-UP


Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.