parts catalog

HARNESS AS 5088134 - Caterpillar

5088134 HARNESS AS Caterpillar parts HARNESS
Alternative (cross code) number:
Caterpillar 5088134 HARNESS AS
Weight: 3 pounds 1 kg.

Buy HARNESS AS 5088134 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Which Generate This Code:Note: The ECM sensor supply provides power to the switch. The switch does not connect directly to the frame ground. The switch connects to the return circuit of the ECM. The ECM internally connects the return wire to frame ground.This diagnostic code is recorded when the ECM detects the signal of the switch as being out of calibration.In order to correct this diagnostic code, calibrate the switch. Perform the calibration procedure for the switch. See Testing and Adjusting, "Calibration" for more information.System Response:The diagnostic code of CID 2529 FMI 13 will be logged in the internal memory of the ECM and a level 1 warning will be generated.Test Step 1. CALIBRATION
Perform the calibration procedure for the switch.Expected Result:The calibration procedure was performed successfully.Results:
YES - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NO - The calibration was not successful.Repair: Repeat the calibration procedure for the switch. See Testing and Adjusting, "Calibration" for more information.STOP

Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.