AVSPARE.COM
parts catalog

HARNESS AS-ENGINE 5088418 - Caterpillar



5088418 HARNESS AS-ENGINE Caterpillar parts HARNESS
Rating:
56
Alternative (cross code) number:
CA5088418
508-8418
5088418
Caterpillar 5088418 HARNESS AS-ENGINE

Buy HARNESS AS-ENGINE 5088418 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 9
 
  For full view, you need register

Information:

Inspection
Inspect the alternator belt and the fan drive belts for wear and for cracking. Replace the belts if the belts are not in good condition.Check the belt tension according to the information in the Service Manual, "Specifications".Slippage of loose belts can reduce the efficiency of the driven components. Vibration of loose belts can cause unnecessary wear on the following components:
Belts
Pulleys
BearingsIf the belts are too tight, unnecessary stress is placed on the components. This reduces the service life of the components.Replacement
For applications that require multiple drive belts, replace the drive belts in matched sets. Replacing one drive belt of a matched set will cause the new drive belt to carry more load because the older drive belts are stretched. The additional load on the new drive belt could cause the new drive belt to fail.Adjustment of the Fan Drive Belt
Remove the belt guard.
Loosen the mounting bolt for the pulley.
Loosen the adjusting nut for the pulley.
Move the pulley in order to adjust the belt tension.
Tighten the adjusting nut.
Tighten the mounting bolt.
Reinstall the belt guard.If new drive belts are installed, check the drive belt tension again after 30 minutes of engine operation at the rated rpm.Adjustment of the Alternator Belt
Illustration 1 g00960176
(1) Adjusting nuts (2) Mounting bolt (3) Mounting bolt (4) Mounting bolt
Remove the drive belt guard.
Loosen mounting bolts (2), (3), and (4). Loosen adjusting nuts (1) .
Turn adjusting nuts (1) in order to increase or decrease the drive belt tension.
Tighten adjusting nuts (1). Tighten mounting bolts (2), (3), and (4) .
Reinstall the drive belt guard.If new drive belts are installed, check the drive belt tension again after 30 minutes of engine operation at the rated rpm.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D8T TRACK-TYPE TRACTOR AW400001-UP (MACHINE) POWERED BY C15 ENGINE


Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.