AVSPARE.COM
parts catalog

HEAD 0005588 - Caterpillar



0005588 HEAD Caterpillar parts HEAD
Rating:
46
Alternative (cross code) number:
CA0005588
000-5588
0005588
Caterpillar 0005588 HEAD
Weight: 373 pounds 169 kg.

Buy HEAD 0005588 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Product Information
This document provides information about the improvements in the AccuGrade Laser Grade Control System software (Version 1.5).
Table 1
Software    
Part Number    Part Name    
239-9271     Software (Mast)    
239-9272     Software (Receiver)    
239-9273     Software (CB420)    
239-9274     Software (Interface Module)    
Improvements
This upgrade includes these improvements:
Functionality of the single laser receiver. Refer to Operation & Maintenance Manual, SEBU7803-02.
CB240 display language is now selectable at start-up.
Illustration 1 g01021351
Display (1) Liquid Crystal Display (LCD) (2) "Left Mast Elevation/Menu Scroll" Switch (3) "Right Mast Elevation/Menu Scroll" Switch (4) "Auto/Manual" Light Emitting Diodes (LED) (5) "Elevation Select" switch (6) "Cursor Scroll Switch" switch (7) "Power/Setup" switch (8) "Escape" Left Reset/Left Bench Button (9) "OK" Right Reset/Right Bench Button (10) Left Grade indicators (11) Right Grade indicators (12) Sensor (Ambient light) When the AccuGrade Laser Grade Control System is turned on, a self test will run. During the self test, the CAT trademark and information for the software version will be displayed on the LCD display. In order to select the language, complete the following steps while the self test is running:
Illustration 2 g01052194
Simultaneously press and then release both the "ESC" (8) and "OK" (9) buttons (See Illustration 1). A menu for the selection of a language will appear on the display screen (1) .
In order to highlight the language preference, toggle either Menu Scroll Switch (2) or (3). Refer to Illustration 1.
In order to select the highlighted language, press the "OK" (9) button.
The menu items in the language selection menu are now displayed in the untranslated form (See Illustration 3).
Illustration 3 g01048315
Known Problems
Setting the global valve speed factor "--Valve Speed--" via the "Valve Speed" menu has no effect. When you calculate the value for the valve drive signal, the global valve speed factor is always 100%.Valve Speed Menu Operation
The dual receiver "Valve Speed" menu will display the three items as shown (See Illustration 4).
Illustration 4 g00994383
The value of the drive signal is based on speed factors of the valve. The value of the drive signal is calculated by using the following formula:DriveSignal = RawSignal X ValveSpeedFactor X GlobalValveSpeedFactorFor example, the global valve speed factor is set to 100% and the left valve speed factor is set to 110%. The drive signal compared to the left valve speed factor would be 110% of the raw signal as shown by the following formula:DriveSignal = RawSignal X 1.1 X 1.0Resolution
This problem will be corrected in a future software release. Until the problem is corrected, always leave the global valve setting "--Valve Speed--" set to 100%. Changes should be made only to the individual valve speed menu items.


Parts head Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.