AVSPARE.COM
parts catalog

HINGE AS-RH 9V9571 - Caterpillar



9V9571 HINGE AS-RH Caterpillar parts 926, 926A, G926 HINGE
Rating:
34
Alternative (cross code) number:
CA9V9571
9V-9571
9V9571
Caterpillar 9V9571 HINGE AS-RH

Buy HINGE AS-RH 9V9571 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9571:

WHEEL LOADER  926   926A   G926   Caterpillar
Number on catalog scheme: 9
 
  For full view, you need register

Information:

Start By:a. remove axles (front or rear) 1. Fasten Tool (A) and a hoist to the final drive planet carrier (1) as shown.2. Remove bolts (2) that hold the final drive planet carrier (1) to the wheel assembly. 3. Install two 3/8 " - 16 NC forcing screws (3) and loosen final drive planet carrier (1) from the wheel assembly. Remove the final drive planet carrier from the wheel assembly. The weight of the final drive planet carrier is 31 Kg (68 lb).4. Remove the O-ring seal from the final drive planet carrier. 5. Remove retaining ring (4) that holds ring gear (5) to the hub assembly and remove ring gear (5).Install Final Drive Carriers & Ring Gears
1. Put ring gear (4) in position on the hub assembly, and install retaining ring (5) that holds the ring gear on the hub assembly. 2. Install O-ring seal (3) on the final drive carrier (1), and put clean oil on it.3. Fasten Tool (A) and a hoist to final drive planet carrier (1) as shown.4. Put final drive planet carrier (1) in position on the wheel assembly. 5. Install 12 bolts (2) that hold the final drive planet carrier to the wheel assembly. Tighten the bolts to a torque of 270 25 N m (200 18 lb ft).End By:a. install axles (front and rear)Disassemble Final Drive Planet Carriers
Start By:a. remove final drive planet carriers and ring gears Two shafts must be removed from the final drive planet carrier so that one of the gears can be removed.1. Remove shafts (1) and (4) from the final drive planet carrier.2. Remove lockwashers (3) and the thrust washers from each side of gears (2) and (5). 3. Push gear (8) in the final drive planet carrier, and remove gear (6) from the planet carrier.4. Remove gear (8) from the planet carrier.5. Remove shaft (7) and the remaining lockwashers, thrust washers and gear from the final drive planet carrier.6. Remove the two bearing assemblies from each gear.Assemble Final Drive Planet Carriers
1. Install two bearing assemblies (1) in each gear (4). Installed gears (4), and thrust washers (2) must be installed between thrust washers (5) and the final drive planet carrier.2. Install the gear assemblies in the final drive planet carrier as follows:a. Install gear (4) and thrust washers (2) at position (X) in the final drive planet carrier to hold them.b. Install another gear (4) at position (Y) in the final drive planet carrier. Push the gear in the planet carrier to provide clearance so that the last gear can be installedc. Install last gear (4) at position (Z) in the final drive planet carrier.3. Install the thrust washers, and thrust washers (2) on each side of the gears (4) at positions (Y) and (Z) in planet carrier. Make sure the flat side of shafts (3) are toward the outside diameter of the final drive planet carrier so that the cover assembly can be installed. For more details concerning positioning of shafts

Caterpillar parts catalog:

Caterpillar parts catalog
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 2XB00001-UP (MACHINE) POWERED BY 3204 ENGINE
G926 WHEEL LOADER 1SD00001-00073 (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
G926 WHEEL LOADER 1SD00001-00073 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE


Parts hinge Caterpillar catalog:

7V4587 HINGE
916, 926, 926A, IT18B, IT28, IT28B
8V2178 HINGE
926, 936, 936F, G936, IT28
7V4587 HINGE
916, 926, 926A, IT18B, IT28, IT28B
8V9865 HINGE
926, IT28, IT28B
8V8751 HINGE
936, CS-643, IT28
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.