AVSPARE.COM
parts catalog

HITCH GP-ARTICULATING 3967673 - Caterpillar



3967673 HITCH GP-ARTICULATING Caterpillar parts 901C, 902C, 903C HITCH
Rating:
77
Alternative (cross code) number:
CA3967673
396-7673
3967673
Caterpillar 3967673 HITCH GP-ARTICULATING

Buy HITCH GP-ARTICULATING 3967673 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3967673:

COMPACT WHEEL LOADER  901C   902C   903C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Bucket Lift Lever
Single Lever Attachment Control (If Equipped). Float (1) - Push the lever all the way forward into detent, for FLOAT. The bucket will lower to the ground, and move up and down, following the ground contour.The lever will remain in FLOAT until pulled out of detent. The lever will then return to HOLD when released.
NEVER use FLOAT position to lower a loaded bucket.Machine damage can result from bucket falling too fast.
LOWER (2) - Push the lever forward to lower the bucket. The lever will return to HOLD when released. HOLD (3) - The lever will return to HOLD when released from either RAISE or LOWER. The bucket will remain in the position it is in. RAISE (4) - Pull the lever back to raise the bucket. Release the lever to stop lifting the bucket. The lever will return to HOLD when released.The lever is detented in the full raise position. It will stay in detent and continue raising, until the bucket reaches height set by the lift kickout. Then it returns to HOLD.Bucket Tilt Lever
Standard Lever
DUMP (1) - Push the lever forward to dump the bucket. HOLD (2) - Release the tilt lever. The bucket will remain in the position it is in. TILT BACK (3) - Pull the lever back to tilt the bucket back.The lever is detented in the full tilt back position. It will stay in detent and continue tilting back, until the bucket reaches the present digging angle set by the kickout. Then it returns to HOLD. If equipped with ride control system, the lift arms may partially lower when the tilt lever is held in the DUMP position with the bucket against the dump stop and the lift arms are in the FULL RAISED position. To avoid lift arm lowering after dumping the bucket, return the tilt lever to the HOLD position.Single Lever Attachment Control (If Equipped)
Single Lever Attachment Control (If Equipped). DUMP (1) - Push the lever to position (1) to dump the bucket. HOLD (2) - Release the tilt lever. The bucket will remain in the position it is in. TILT BACK (3) - Push the lever to position (3) to tilt the bucket back.The lever is detented in the full tilt back position. It will stay in detent and continue tilting back, until the bucket reaches the present digging angle set by the kickout. Then the lever returns to HOLD. If equipped with ride control system, the lift arms may partially lower when the tilt lever is held in the DUMP position with the bucket against the dump stop and the lift arms are in the FULL RAISED position. To avoid lift arm lowering after dumping the bucket, return the tilt lever to the HOLD position.Multipurpose Bucket Bowl Lever
Single Lever Atachment Control (If Equipped). CLOSE (1) - Push the lever forward to close the bowl. Release the lever and it will return to HOLD. HOLD (2) - Release the lever. The bowl will remain in the position it

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
901C Compact Wheel Loader W4T00001-UP (MACHINE) POWERED BY C1.8 Engine
902C Compact Wheel Loader W5T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine
901C2 Compact Wheel Loader YKY00001-UP (MACHINE) POWERED BY C1.7 Engine
902C2 Compact Wheel Loader YKT00001-UP (MACHINE) POWERED BY C2.4 Engine
903C2 Compact Wheel Loader MW800001-UP (MACHINE) POWERED BY C2.4 Engine


Parts hitch Caterpillar catalog:

1660136 HITCH GP
550, 550B, 560B, 570, 570B, 580, 580B
1593676 HITCH GP-ARTICULATING
550, 550B, 560B, 570, 570B, 580, 580B
2447434 HITCH GP-TOWING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
3671841 HITCH GP
525D, 535D, 545D, 555D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.