HOSE AS 1694961 - Caterpillar

Illustration 1 g01456937
Note: All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly.Use the following procedure to tighten the track bolts:
Tighten the track bolts to 400 70 N m (300 50 lb ft).
Tighten the track bolts to an additional 120 5 degrees.The maximum assembly force for the track link assembly is 665000 N (149500 lb).The assembly force for the master pin (1) is 77000 N (17310 lb). (A) Protrusion for one end of the standard pin (2) ... 4.9 0.8 mm (0.19 0.03 inch) (B) Protrusion for each end of the standard bushing ... 1.80 0.13 mm (0.071 0.005 inch) (D) Distance between the bolt holes ... 134.85 0.80 mm (5.309 0.031 inch) (E) Distance between the bolt holes ... 158.73 0.80 mm (6.249 0.031 inch) (F) Distance between the bolt holes ... 137.29 0.39 mm (5.405 0.015 inch) (G) Distance between the bolt holes ... 185.29 0.39 mm (7.295 0.015 inch)
Illustration 2 g01456938
View of area C (H) Protrusion for the master bushing ... 0.00 0.25 mm (0.000 0.010 inch)