HOSE-RADIATOR 1695019 - Caterpillar

Illustration 2 g01198620
(3) Scissor Assembly (4) Bolts (5) Shock Absorber (6) Housing Assembly
Raise scissor assembly (3) and install blocking in order to prevent the scissor assembly (3) from falling.
Remove bolts (4) in order to remove shock absorber (5) from scissor assembly (3) and housing assembly (6) .
Illustration 3 g01198625
Existing Shock
Remove bearings (7B) from shock absorber (8) .Note: Illustration 3 shows the location of lockwasher (7A), bearings (7B), washers (7C), nut (7D), and locknut (7E).
Repeat Steps 4 and 5 if the seat is equipped with a shock absorber on the opposite side.
Illustration 4 g01198627
212-7779 Shock Absorber Kit (9) 192-7812 Shoulder Bolt (10) 212-7780 Shock Absorber (11) 3J-4818 Lockwasher (12) 163-1137 Bearing (13) 192-7811 Washer (14) Nut (15) 2K-4973 Locknut
Install bearings (12) to shock absorber (10) .
Illustration 5 g01198644
(16) Clamp (17) Bolt (18) Cable Assembly (19) Bracket (20) Shock Absorber
If this shock absorber kit is disconnected, then replace this shock absorber kit.
Illustration 6 g01198661
(21) Scissor Assembly (22) Bolts (23) Shock Absorber (24) Housing Assembly
Install bolts (22) in order to attach shock absorber (23) to scissor assembly (21) and housing assembly (24). Remove the blocking. Note: Illustration 4 shows the location of lockwasher (11), bearings (12), washers (13), nut (14), and locknut (15).
Repeat Steps 7 and 9 in order to attach the nonadjustable shock absorber on the opposite side.Note: Invert the location of the following components: lockwasher (7A), bearings (7B), washers (7C), nut (7D) and locknut (7E). See Illustration 3. Note: Perform Step 10 only if the adjustable shock absorber is being installed in addition to the existing nonadjustable shock.
Illustration 7 g01198677
(25) Bolts (26) Bracket (27) Cable Assembly (28) Bolt (29) Bolt (30) Lever
Install bolts (25) in order to attach bracket (26) .
Install bolt (29) in order to attach lever (30) to bracket (26) .
Install bolt (28) in order to attach cable assembly (27) to lever (30) .Installing the Ride Indicator
Illustration 8 g01198545
213-5170 Indicator Kit (31) Locknut (32) Rod (33) Indicator Arm (34) Nut (Self-Locking) (35) Housing (36) Bolt (Hex 10-24)
Illustration 9 g01198690
(37) Link (38) Rod (39) Indicator Arm
Install the rod (38) and nuts on link (37) .Note: Orient the rod (38) in the curvature toward the top of the suspension. Do not bend the rod.
Install indicator arm (39) onto rod (38) .
Illustration 10 g01198699
(40) Bolts (41) Indicator
Install bolts (40) in order to attach indicator (41) to the seat.
Illustration 11 g01198706
(42) Boot
Install boot (42) to the suspension.