AVSPARE.COM
parts catalog

HOSE-HUMP 1C4048 - Caterpillar



1C4048 HOSE-HUMP Caterpillar parts PR-1000, PR-750B HOSE
Rating:
63
Alternative (cross code) number:
CA1C4048
1C-4048
1C4048
Caterpillar 1C4048 HOSE-HUMP
Weight: 1 pounds 0 kg.

Buy HOSE-HUMP 1C4048 Caterpillar genuine, new aftermarket tractor parts with delivery
COLD PLANER,

Compatible equipment models: 1C4048:

COLD PLANER  PR-1000   PR-750B   Caterpillar
Number on catalog scheme: 25
 
  For full view, you need register

Information:


Illustration 4 g06285785Note: Before you remove the counterweight, disconnect the wiring for the rear view camera. Refer to Operation and Maintenance Manual, "Camera Harness - Disconnect and Connect" for more information.
Position the machine on a surface that is hard and level.
Position the upper structure parallel to the tracks. Lower the work tool to the ground.
Illustration 5 g06285793
Remove the Plate.
Illustration 6 g06284903
Remove the six bolts from the counterweight.Note: Move the counterweight a little if it is difficult to remove bolts. Refer to step 10 to move the counterweight.
Set engine speed dial to "1".
Illustration 7 g06284701
Move the hydraulic lockout control to the LOCKED position.
Illustration 8 g00104545
Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls.
Open the rear access door on the right side of the machine.
Illustration 9 g06285813
(1) Main Switch
(2) Up/Down Switch
Move switch (1) to the ON position.
Use the Up/Down switch (2) to lower linkage.
Illustration 10 g06285844
Remove the counterweight hood after the counterweight is lowered to the ground.
Illustration 11 g06285861
Unbolt the two pins (3), and remove them from the block.
Illustration 12 g06285883
Lift the linkage up a little and move two pins (3) back to the linkage.
Illustration 13 g06285897
Move the linkage back to the machine.
Illustration 14 g06285901
Move the plate to lock the adjustment bolt and block.
Illustration 15 g06285844
Move the counterweight hood back.
Illustration 16 g02097577
Fasten a proper rated cable with shackles to the lifting eyes on the counterweight.
Illustration 17 g02102179
Use an appropriate lifting device to put the counterweight on suitable supports.Counterweight Installation
Perform the installation procedure in reverse order.Note: Make sure that you remove pin (11), bolt (13), and washer (14). Return these parts to the storage box.Note: Before you install the counterweight mounting bolts, make sure that the retaining pins are in the LOCKED position and that the counterweight is securely held on the retaining pins. There should be a slight amount of slack on the chains.Tighten the counterweight mounting bolts to a torque of 2700 300 N m (1990 220 lb ft).Note: After the counterweight has been installed, reconnect the wiring for the rear view camera. Refer to Operation and Maintenance Manual, "Camera Harness - Disconnect and Connect" for more information.

Caterpillar parts catalog:

Caterpillar parts catalog
PR-1000 PAVEMENT PROFILER 5XC00001-00137 (MACHINE) POWERED BY 3208,3412 ENGINE
PR-750B PAVEMENT PROFILER 8AC00001-UP (MACHINE) POWERED BY 3412 ENGINE


Parts hose Caterpillar catalog:

5P1255 HOSE
120M, 12H NA, 12M, 140H, 140M, 141, 143H, 14H NA, 14M, 160H, 160H ES, 160H NA, 160M, 163H NA, 1673C, 16G, 16H NA, 235B, 245, 245B, 24H, 320B, 330, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 3406, ...
5P1251 HOSE
120K, 120K 2, 120M, 12K, 12M, 140K, 140K 2, 140M, 160K, 160M, 16M, 235, 245, 245B, 24H, 24M, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3306, 3306B, 3406, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 341...
5P1259 HOSE
12M, 140G, 140M, 245B, 24M, 3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406E, 3408, 3408B, 3412, 3412C, 3412D, 3412E, 446, 515, 518, 518C, 525, 554, 574, 594H, ...
5P1265 HOSE
120G, 12G, 130G, 140G, 14G, 14M, 160G, 16G, 16H NA, 224, 245, 245B, 245D, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3456, 5130, 5130B, 5230B, 578, 583R, 587R, 611, 615, 615C, 621B, 621E, 621...
3N4579 HOSE AS
3208, 3304, 3306, 3406, 3406B, 3408, 3412, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, C18, C30, C32, CG137-08, CG137-12, D342, D346, D353C, D379B, D398A, D398B, G3304, G3304...
6V8523 HOSE
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 30...
5P0765 HOSE
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K...
6N4379 HOSE AS
227, 3304, 3408, 3412, 3412C, 3412D, 3508, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, C280-16, G3406, PM3412, PR-1000, PR-750B
6N4376 HOSE AS
3408, 3408E, 3412, 3412C, 3412D, 621, 621B, PM3412, PR-1000, PR-750B
5P0764 HOSE
235, 3208, 3406, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 5130, 5130B, 5230, 5230B, 594H, 631E, 631G, 633E II, 637E, 637G, 641B, 657E, 69D, 769C, 769D, 771C, 771D, 772, 776, 776C, 776D, 777, 777B, 777D...
6N7030 HOSE
3408, 3408C, 3408E, 3412, 3412C, 3412E, G3408, G3412, PR-1000
0817126 HOSE
PR-1000, PR-750B
1C4513 HOSE
PR-1000, PR-750B
8C1901 HOSE AS
AP-1200, AP-800
9N7673 HOSE AS
PR-1000, PR-750B
8T5469 HOSE AS
PR-450, PR-750B
9N7674 HOSE AS
PR-1000, PR-750B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.