AVSPARE.COM
parts catalog

HOSE 2278234 - Caterpillar



2278234 HOSE Caterpillar parts 924G, 924GZ HOSE
Rating:
64
Alternative (cross code) number:
CA2278234
227-8234
2278234
Caterpillar 2278234 HOSE
Weight: 2 pounds 1 kg.

Buy HOSE 2278234 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 2278234:

WHEEL LOADER  924G   924GZ   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:

Enclosed Clutches And/Or Front Power Take-Off
Checking Clutch Adjustment
While engaging the clutch to pick up the load, check the clutch adjustment. The clutch should engage with a hard push and distinct snap. If engagement is "soft", adjust the clutch.Adjusting Clutch
1. Stop the engine and remove the clutch inspection cover.
CLUTCH INSPECTION COVER2. Turn the clutch until the lock pin, engaged in the locking ring, is visible.3. Pull the lock pin out and rotate the locking ring clockwise until the lock pin pops into the next notch.
PULLING LOCKING PIN4. Test the clutch adjustment. If still too "soft", rotate the ring to the next notch. If the adjustment is too tight-turn the ring back one notch.5. Install the cover.Lubricating D346, D379, D398 Flywheel Clutches: And All Front Power Take-Off Clutches
Lubricate the clutch bearings with grease, 1 or 2 strokes each fitting.1. Lubricate the shift-collar bearing; 1 fitting at top-left of center.2. Lubricate the shaft bearing; 1 fitting on top-rear of housing.3. Lubricate the pilot bearing; 1 fitting at the end of the shaft. If this fitting is not accessible, remove the plug located on the circumference of the shaft near the rear of the housing.
PILOT, SHIFT COLLAR AND SHAFT BEARINGS4. Lubricate the shift lever bearings; 1 fitting on each side of the clutch housing.
LUBRICATING SHIFT LEVER BEARINGSLubricating D348, D349 Or D399 Engine Flywheel Clutch
1. Lubricate the shift lever bearings; 1 fitting on each side of clutch housing.
SHIFT LEVER BEARING2. Lubricate the pilot bearing; 1 fitting at the end of shaft. If this fitting is not accessible, remove the plug located on the circumference of the shaft near the rear of the housing, and install a fitting.
PILOT AND SHIFT COLLAR BEARINGS3. Lubricate the shift-collar bearing; 1 fitting at top-left of center.4. Check the main shaft bearing oil reservoir level with engine stopped. Maintain the oil level at the FULL mark on the oil level gauge. Add oil through the filler tube on top of the bearing cage housing. Refer to Lubrication and Maintenance Chart for proper oil.
CHECKING OIL LEVEL5. To drain the reservoir: Remove the drain plug located on the lower left side of the shaft bearing reservoir. Drain and install the drain plug. Fill to the FULL mark on the oil level gauge. Install the filler cap.
CLUTCH SHAFT BEARING DRAIN PLUGElectric Set Generator
If the electric set generator is not of Caterpillar design, see the manufacturer's instructions for the required lubrication and maintenance procedures.Inspecting Slip Ring
1. Remove the two lower panels from the rear of the generator housing.2. Inspect the slip ring color. The slip ring color may be shiny copper to straw, or chocolate to black, but the color must be uniform to indicate satisfactory operation.If the ring is basically one of the above shades, but contains blotches of green, blue or black, clean the ring with an electrical cleaning solvent.
Do not use gasoline or carbon tetrachloride. Both solvents will dissolve insulation. The vapors from carbon tetrachloride can be harmful when inhaled.
Green blotches are caused by chlorine vapors, blue blotches are caused

Caterpillar parts catalog:

Caterpillar parts catalog
924G 924Gz Wheel Loader DDA00001-03916 (MACHINE) POWERED BY 3056E Engine
924G 924Gz Wheel Loader WGX00001-UP (MACHINE) POWERED BY 3056E Engine
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine
924G Wheel Loader Defense and Federal Products EEB00001-UP (MACHINE) POWERED BY 3056E Engine


Parts hose Caterpillar catalog:

5P1442 HOSE
120B, 120G, 120H, 120H ES, 120H NA, 120M, 120M 2, 12G, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H NA, 140B, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 215, ...
5P0767 HOSE
1090, 1190, 1190T, 120G, 1290T, 1390, 140G, 215, 215B, 215C, 215D, 225, 225D, 227, 229, 2290, 229D, 231D, 235, 235B, 235C, 235D, 236D, 2384C, 2390, 2391, 242D, 245, 245B, 245D, 246D, 2470C, 2484C, 249...
5P1420 HOSE
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
5P1505 HOSE
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 216B, 216B3, 226B, 226B3, 232B, 2384C, 242B, 247B, 247B3, 2484C, 257B, 2864C, 307B, 311, 3116, 311B, 312, 3126, 312B, 3...
8C3681 HOSE
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16H NA, 225D, 231D, 236D, 242D, 2...
5P0743 HOSE
120K, 120K 2, 120M, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 160M, 16M, 216, 228, 236, 236B, 236D, 242B, 242D, 246D, 247, 247B, 248, 257D, 259D, 262D, 267, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287...
1945171 HOSE
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3,...
9X2133 HOSE
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 303, 303.5C, 303.5D, 303.5E, 303C CR, 3...
5P0765 HOSE
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K...
5T9986 HOSE AS
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16G...
6G9933 HOSE AS
621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 637D, 637E, 651E, 657E, 657G, 924G, 924GZ, 928G, 928HZ, 930G, IT28G
1583820 HOSE AS
844, 924G, 924GZ, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G II, 980H, 990 II, AP-600D, AP-655D, BG600D, BG655D, IT62G, IT62G II
2972789 HOSE AS
924G, 924GZ, 924H, 928HZ, 930G
2142232 HOSE AS
924G, 924GZ, 924H, 924HZ
2057106 HOSE AS
924G, 924GZ, 924H, 924HZ
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.