AVSPARE.COM
parts catalog

HOSE AS 2332993 - Caterpillar



2332993 HOSE AS Caterpillar parts MP15, P360, VHC-30, VT30 HOSE
Rating:
12
Alternative (cross code) number:
CA2332993
233-2993
2332993
Caterpillar 2332993 HOSE AS

Buy HOSE AS 2332993 Caterpillar genuine, new aftermarket tractor parts with delivery
CRUSHER, MULTI PROCESSOR,

Compatible equipment models: 2332993:

CRUSHER  P360   VHC-30  
MULTI PROCESSOR  MP15   VT30   Caterpillar
Number on catalog scheme: 6
 
  For full view, you need register

Information:

(1) Use shims as needed to obtain a backlash, between bevel gear (2) and pinion (12), of ... 0.16 0.06 mm (.006 .002 in.)(3) Use shims as needed to first obtain an end play, for bearings on bevel gear shaft (10), of ... 0.10 0.05 mm (.004 .002 in.) Then check backlash between pinion (4) and bevel gear (6).With pinion (4) held, backlash must be ... 0.315 0.11 mm (.012 .004 in.)If backlash is too high, subtract shims (3) and add same amount to shims (8).If backlash is too low, subtract shims (8) and add same amount to shims (3).(5) Use shims as needed to obtain a rolling torque, for pinion (4) after five revolutions, of ... 1.7 0.5 N m (15 4 lb.in.)(7) Torque for locknuts ... 875 50 N m (640 37 lb.ft.)(9) Torque for bolts ... 110 10 N m (80 7 lb.ft.)(11) Put 5P3931 Anti-Seize Compound on threads of nut and tighten nut to obtain a rolling torque for pinion (12) after five revolutions of ... 1.1 0.5 N m (10 4 lb.in.)(13) Use shims (13) as needed to obtain a dimension (14) between outside diameter of bevel gear (2) and shoulder of bearing, of ... 3.93 0.05 mm (.155 .002 in.)

Caterpillar parts catalog:

Caterpillar parts catalog
MP15, MP20, MP30 & MP40 Multi-Processors ABR00001-UP (MACHINE)
MP15, MP20, MP30 & MP40 Multi-Processors M2W00001-UP (MACHINE)
VT-30, VT-40, VT-50 & VT-60 Multi-Processors P2W00001-UP (MACHINE)
VHC-30, VHC-40, VHC-50 & VHC-60 Hydraulic Crushers WPA00001-UP (MACHINE)
P315, P325, P335 & P360 Hydraulic Crushers WPL00001-UP (MACHINE)


Parts hose Caterpillar catalog:

1699049 HOSE AS
320C, 325B L, 325D L, 330C, 345B II, 416D, 420D, 430D, 924G, 924GZ, 924H, CTV40, G315B, G320, G325B, MP15, MP318, P360, S305, S365B, S365C, VHC-30, VHS-50, VHS-60/3, VHS-60/4, VRG-20/2, VRG-40/2, VRG3...
1879053 HOSE AS
D5N, GSH15, GSH15-60, GSH22B, GSH9, GSH9B, MP15, P360, VHC-30, VT30, VT50
1721108 HOSE AS
AP-650B, AP-800C, AP-800D, BG-225B, BG-225C, G320, MP15, P360, S305, S365B, VHC-30, VHS-50, VHS-60/3, VRG30, VT30, VT50
1704589 HOSE AS
320C, 325B L, 325D L, 330C, 345B II, MP15, P360, VHC-30, VT30, VT50
1744742 HOSE AS
MP15, P360, VHC-30, VT30, VT50
1744743 HOSE AS
MP15, P360, VHC-30, VT30, VT50
1747753 HOSE AS
MP15, P360, VHC-30, VT30, VT50
2279860 HOSE AS
330C, 330C L, MP15, P360, S365B, VHC-30, VHS-60/3, VT30, VT50
3290098 HOSE AS
MP15, P360, S365B, S365C, VHC-30, VHS-60/3, VHS-60/4, VT30
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.