AVSPARE.COM
parts catalog

HOSE AS 3156526 - Caterpillar



3156526 HOSE AS Caterpillar parts 814F II, 815F II, 816F II, 966H, 972H, 980G II, 980H HOSE
Rating:
25
Alternative (cross code) number:
CA3156526
315-6526
3156526
Caterpillar 3156526 HOSE AS

Buy HOSE AS 3156526 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR, WHEEL LOADER,

Compatible equipment models: 3156526:

LANDFILL COMPACTOR  816F II  
SOIL COMPACTOR  815F II  
WHEEL DOZER  814F II  
WHEEL LOADER  966H   972H   980G II   980H   Caterpillar
Number on catalog scheme: 9
 
  For full view, you need register

Information:

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Prior to installation, lubricate all seals with oil.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00690308
Install new O-ring seals (28), (27), (26), and (25) onto the fittings.
Illustration 2 g00884460
Install fittings (23), (22), (20), and (24).
Install six plugs (21). Tighten plugs (21) to a torque of 6.9 1.0 N m (61 8.8 lb in).
Illustration 3 g01173629
Install new O-ring seal (19) onto tee fittings (17).
Illustration 4 g01173634
Install new O-ring seal (18) onto nipples (16).
Illustration 5 g00884459
Install tee fittings (17), nipples (16), and caps (15).
Illustration 6 g00884462
Install new backup ring (14) and new O-ring seal (13).
Install new O-ring seal (12) and new backup ring (11).
Install new O-ring seal (10) and new backup ring (9).
Illustration 7 g00690234
Install shuttle valves (8). Tighten shuttle valves (8) to a torque of 48 3 N m (35 2 lb ft).
Illustration 8 g01173821
Install new O-ring seals (7), (6), (5), and (4) onto the pressure reducing valve.
Illustration 9 g00690197
Install pressure reducing valve (1) into body (3).
Install bolts (2). Tighten bolts (2) to a torque of 6.9 0.7 N m (61 6.2 lb in). End By:
Install the control manifold. Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Install".

Caterpillar parts catalog:

Caterpillar parts catalog
815F Series 2 Soil Compactor BYN00001-UP (MACHINE) POWERED BY C9 Engine
816F Series 2 Landfill Compactor BZR00001-UP (MACHINE) POWERED BY C9 Engine
2Q-8478 Steel Mill Arrangement Custom Product Support Literature for the 980G Series II Wheel Loader AXG00001-UP (MACHINE)
STEEL MILL AR FOR THE 980H WHEEL LOADER JMS00001-04999 (MACHINE)
303-4178 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 972H WHEEL LOADERS A7D00001-UP (MACHINE)
331-9943 STEEL MILL AR CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 980H WHEEL LOADERS JMS00001-UP (MACHINE)
331-9944 STEEL MILL AR CUSTOM PRODUCT SUPPORT LITERATURE FOR THE MHG00001-UP (MACHINE)
380–7254 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 966H WHEEL LOADER RYF00001-UP (MACHINE)
972H Custom Product for Wheel Loader LCC00001-UP (MACHINE)
980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine
814F Series 2 Wheel Dozer BXG00001-UP (MACHINE) POWERED BY C9 Engine


Parts hose Caterpillar catalog:

3376883 HOSE AS
980G, 980G II, 980H
3376882 HOSE AS
980G, 980G II, 980H
3341023 HOSE AS
980G, 980G II, 980H
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.