AVSPARE.COM
parts catalog

HOSE AS 3535203 - Caterpillar



3535203 HOSE AS Caterpillar parts 793F CMD HOSE
Rating:
82
Alternative (cross code) number:
CA3535203
353-5203
3535203
Caterpillar 3535203 HOSE AS

Buy HOSE AS 3535203 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3535203:

TRUCK  793F CMD   Caterpillar
Number on catalog scheme: 66
 
  For full view, you need register
3535203 Images:
Caterpillar parts 3535203
Caterpillar parts 3535203

Information:

Start By:
Remove the equalizer bar pads. Refer to Disassembly and Assembly, "Equalizer Bar Pads - Remove".
Remove the track roller frame (left or right). Refer to Disassembly and Assembly, "Track Roller Frame - Remove".
Illustration 1 g01413916
Attach a suitable lifting device to equalizer bar (1) in order to support equalizer bar (1) during the removal procedure.
Illustration 2 g01413482
Disconnect hoses (2) and (4) . Remove bolts (3) and (6) . Remove plate (5) from the equalizer bar center pin.
Illustration 3 g01413924
Install Tooling (A) between the front of equalizer bar (1) and the saddle. Tooling (A) will prevent movement and binding of the saddle when the center pin is removed.
Illustration 4 g01413934
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Note: Threaded Rods cannot be used with Hydraulic Cylinders as Tooling.
Install Tooling (B) to equalizer bar center pin (7) .
Use Tooling (B) in order to pull equalizer bar center pin (7) out of the saddle approximately 88.9 mm (3.50 inch).
Illustration 5 g01413961
Place Tooling (D) in position under equalizer bar center pin (7) .
Use Tooling (C) to pull equalizer bar center pin (7) out of the equalizer bar and onto Tooling (D) .
Lower the end of the equalizer bar to the ground and remove the nylon strap.
Remove the spacers between the equalizer bar and the saddle.
Illustration 6 g01414064
Attach a suitable lifting device to the end of equalizer bar (1) that is still attached to the track roller frame. The weight of equalizer bar (1) is approximately 771 kg (1700 lb).
Loosen bolts (8) . Remove the retaining ring and the spacer from equalizer bar end pin (9) .
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Note: Threaded Rods cannot be used with Hydraulic Cylinders as Tooling.
Install Tooling (E) to equalizer bar end pin (9) . Attach a suitable lifting device to Tooling (E) .
Remove equalizer bar end pin (9) .
Lower equalizer bar (1) to the ground. Pull equalizer bar (1) outward from the machine.

Caterpillar parts catalog:

Caterpillar parts catalog
793F OFF-HIGHWAY TRUCK D3T00001-UP (MACHINE) POWERED BY C175 ENGINE
793F CMD Off-Highway Truck (Command for Hauling) RBT00001-UP (MACHINE) POWERED BY C175-16 Engine


Parts hose Caterpillar catalog:

5P1255 HOSE
120M, 12H NA, 12M, 140H, 140M, 141, 143H, 14H NA, 14M, 160H, 160H ES, 160H NA, 160M, 163H NA, 1673C, 16G, 16H NA, 235B, 245, 245B, 24H, 320B, 330, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 3406, ...
5P1262 HOSE
120B, 120G, 120H, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 130G, 135H, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H, 163...
5P1251 HOSE
120K, 120K 2, 120M, 12K, 12M, 140K, 140K 2, 140M, 160K, 160M, 16M, 235, 245, 245B, 24H, 24M, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3306, 3306B, 3406, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 341...
5P1265 HOSE
120G, 12G, 130G, 140G, 14G, 14M, 160G, 16G, 16H NA, 224, 245, 245B, 245D, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3456, 5130, 5130B, 5230B, 578, 583R, 587R, 611, 615, 615C, 621B, 621E, 621...
5P0743 HOSE
120K, 120K 2, 120M, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 160M, 16M, 216, 228, 236, 236B, 236D, 242B, 242D, 246D, 247, 247B, 248, 257D, 259D, 262D, 267, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287...
6V8523 HOSE
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 30...
8W3166 HOSE AS
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 627E, 627F, 637E, 793F, 793F CM...
4E2392 HOSE AS
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 5230B, 793D, 793F CMD, 988F...
8X6127 HOSE AS
793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
2195121 HOSE AS
793F CMD, 824G II, 825H, 826G II, 826H
2144734 HOSE AS
793F CMD, CVP16
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.