AVSPARE.COM
parts catalog

HOSE AS 3598906 - Caterpillar



3598906 HOSE AS Caterpillar parts HOSE
Rating:
11
Alternative (cross code) number:
CA3598906
359-8906
3598906
Caterpillar 3598906 HOSE AS

Buy HOSE AS 3598906 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 6
 
  For full view, you need register

Information:

1. Remove two clamps (1) from the joint assembly. 2. Push end (3) and collar (4) toward the valve as shown.3. Remove five bolts (2), valve (5) and the gasket.4. Remove collar (4) from the valve.Install Selector Control Valve Group
1. Install collar (3) on the valve.2. Install the gasket, valve (1) and the five bolts that hold the valve in place.3. Pull collar (3) and end (2) in position as shown. 4. Install two clamps (4) on the joint assembly.Disassemble Selector Control Valve Group
start by:a) remove control valve group1. Remove three bolts (2) and bottom cover (1).
Be careful when valves are removed from the valve body. A valve that has a scratch can cause bad operation of the control valve.
2. Remove valve spool (7), spacers (6), two springs (5) and two O-ring seals (4) from the valve body.3. Remove end (3) from the nipple. 4. Remove ring (9), retainer (8), the spring and the poppet from valve spool (7). As lever (12) is removed, be careful of the two balls and the spring in the lever. 5. Remove the cotter pin, pin (13) and lever (12).6. Remove three bolts (11), cover (10) and the two O-ring seals. 7. Remove stop (18), valve (17) and spring (16).8. Remove piston (19).9. Remove valve spool (15) and bushing (14). Remove the two O-ring seals from the bushing.Selector Control Valve Group Assemble Selector Control Valve Group
1. Install two O-ring seals on bushing (3), one inside and one outside. Install the bushing on valve spool (2).2. Install the bushing and the valve spool in the valve body (1) as a unit. 3. Install piston (4), spring (5), valve (6) and stop (7) in the valve body. 4. Install two O-ring seals (9) and cover (8) with three bolts. 5. Install poppet (11), spring (12), retainer (13) and the ring in valve spool (10). 6. Install end (14), two O-ring seals (15), two springs (16) and valve spool (10) in the valve body. 7. Install cover (17) with three bolts. 8. Install two balls (19) and spring (20) in lever (18). 9. Hold the spring and the balls in the lever. Install the lever on the valve with the pin and the cotter pin.end by:a) install control valve group

Caterpillar parts catalog:

Caterpillar parts catalog
390F L Excavator HNG00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator FEH00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator HSM00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator TYE00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator GAY00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator HJD00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator YHT00001-UP (MACHINE) POWERED BY C18 Engine


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.