AVSPARE.COM
parts catalog

HOSE AS 3598908 - Caterpillar



3598908 HOSE AS Caterpillar parts HOSE
Rating:
51
Alternative (cross code) number:
CA3598908
359-8908
3598908
Caterpillar 3598908 HOSE AS

Buy HOSE AS 3598908 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


ACTION REQUIRED
The hose portion of the fuel line tube assemblies need to be inspected, reworked, and possibly replaced on certain C32 Marine Engines.
Refer to the attached Rework Procedure.
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job
An additional 1.0 hour will be allowed if the tube assemblies have to be replaced due to damage.
Reasonable travel and mileage is authorized. Travel will only be authorized for one engine for multiple engines being reworked in a boat. Please reference the other engine serial numbers in the claim story.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE FUEL LINES ON CERTAIN C32 MARINE ENGINES
MODELS INVOLVED - C32 Marine Engines
Dear Caterpillar Product Owner:
The hose portion of the fuel line tube assemblies need to be inspected, reworked, and possibly replaced on certain C32 Marine Engines. The existing fuel lines can rub or chafe on other engine components that could potentially lead to a fuel leak. This leak may result in a fire, which may result in personal injury or death. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 11Feb2009 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction.
Caterpillar Inc.
Identification #(s)
Attached to 11Feb2009 Service Letter
Rework Procedure
1. Inspect the ECM/Engine harness at the rear of the engine where it connects into the ECM J1/P1 and J2/P2 connection to ensure it is not making contact with the rear fuel hose. Inspect the fuel hose for any signs of chafing from contact with the harness.
2. Replace the hose with a new hose if there are signs of chafing on the hose. Use (2) qty 7K-1181 Straps to support the ECM harness so it does not make contact with the fuel hose after the hose has been inspected/replaced.
If the 5N-2368, 6N-3876, 106-4303 or 131-0113 hose assembly is damaged and needs to be replaced these hoses are not serviceable as a complete hose and must be fabricated. Refer to the Hydraulic Information System; HTTPS://HIS.CAT.COM for details.
Image1.1.1


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.