5089019 HOSE AS Caterpillar parts HOSE
Alternative (cross code) number:
Buy HOSE AS 5089019 Caterpillar genuine, new aftermarket tractor parts with delivery
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03345316
Components of the hydraulic oil tank for the implement and hydraulic fan system are located beneath the platform on the right-hand side of the cab.
(1) Retaining bolts and washers
(2) Access panel
(3) Retaining nuts and washers
(4) Hydraulic tank oil filter assembly
(5) Access door
(6) Breaker relief valve
Open access door (5) in the platform on the right-hand side of the cab.
Push the button on the top of the breaker relief valve (6) in order to relieve any tank pressure.
Remove four bolts and washers (1) that retain access panel (2) in the platform above the hydraulic filter assembly. Remove the access panel.
Clean the cover to hydraulic tank oil filter assembly (4) and the surrounding surface area.
Remove four nuts and washers (3) that secure the cover to the hydraulic oil tank. Lift on the handle of the cover to remove the hydraulic tank oil filter assembly from the hydraulic oil tank.
Illustration 2 g03345412
Hydraulic tank oil filter assembly.
(7) Retaining locknut
(8) Filter retainer assembly
(9) Filter elements
(10) Filter cover assembly
(11) Cover seal
(12) Filter rod
(13) Filter retainer assembly seal
Remove retaining locknut (7) and filter retainer assembly (8) from filter rod (12).
Remove used filter elements (9) from the filter rod. Dispose of the used filter elements properly.
Wash the retaining locknut, filter retainer assembly, filter cover assembly, and the filter rod in a clean, nonflammable solvent.
Inspect cover seal (11) and filter retainer assembly seal (13) for damage. Replace the seals, if necessary.
Install new filter elements, the filter retainer assembly, and the retaining locknut on the filter rod. Reinstall the hydraulic tank oil filter assembly into the hydraulic oil tank.
Secure the cover assembly with the retaining nuts and washers.
Start the engine. Run the engine at low idle and check for leaks in the hydraulic system.
Stop the engine.
Check the hydraulic oil level. Reference: Refer to Operation and Maintenance Manual, "Hydraulic System Oil (Implement) (Hydraulic Fan) - Check" for the correct procedure.
Close access door (5) in the platform.
Install access panel (2) in the platform and secure with retaining bolts and washers (1).
Caterpillar parts catalog:
Caterpillar parts catalog
- 508-8774: LINES GP-STICK » M00769100277
- 508-8774: LINES GP-STICK » M00769140247
- 508-8774: LINES GP-STICK » M00769160296
Parts hose Caterpillar catalog:
5089018 HOSE AS
5089012 HOSE AS
5089011 HOSE AS
5088626 HOSE AS
5088625 HOSE AS
5088624 HOSE AS
5092348 HOSE AS
5091718 HOSE AS
5091717 HOSE AS
5091716 HOSE AS
5091715 HOSE AS
5089758 HOSE AS