AVSPARE.COM
parts catalog

HOSE A 9W0061 - Caterpillar



9W0061 HOSE A Caterpillar parts HOSE
Rating:
81
Alternative (cross code) number:
CA9W0061
9W-0061
9W0061
Caterpillar 9W0061 HOSE A
Weight: 5 pounds 2 kg.

Buy HOSE A 9W0061 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove cover (1) from the front of the cylinder block. 2. Remove plunger assembly (2) and spring (3) from the front of the cylinder block. 3. Remove the gear assembly, idler gear and shaft from over cover (4) on the rear of the cylinder block.4. Remove cover (4) from the rear of the cylinder block. 5. Remove plunger assembly (5) and spring (6) from the rear of the cylinder block. The following steps are for installation of the oil sequence valves.6. Put clean engine oil on spring (6) and plunger assembly (5), and install them as shown in the rear of the cylinder block.7. Install cover (4). Install the idler gear, shaft and gear assembly over cover (4) on the rear of the cylinder block.8. Put clean engine oil on spring (3) and plunger assembly (2), and install them in the front of the cylinder block as shown.9. Install cover (1) to hold the plunger assembly and spring in position.End By:a. install flywheel housingb. install front drive housing


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.