AVSPARE.COM
parts catalog

HOSE AS 9W0546 - Caterpillar



9W0546 HOSE AS Caterpillar parts D8N HOSE
Rating:
56
Alternative (cross code) number:
CA9W0546
9W-0546
9W0546
Caterpillar 9W0546 HOSE AS
Weight: 4 pounds 2 kg.

Buy HOSE AS 9W0546 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 9W0546:

TRACK-TYPE TRACTOR  D8N   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tool is used in the aperture for the electric starting motor.Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove" for the correct procedure. Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the crankshaft is installed, use Tooling (A) to rotate the crankshaft in order to gain access to the piston cooling jet.
Illustration 1 g02011713
Remove bolt (1) and piston cooling jet (2) from the cylinder block. Remove O-ring seal (3) (not shown).
Repeat Step 1 through Step 2 in order to remove the remaining piston cooling jets. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tool is used in the aperture for the electric starting motor.Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02011713
Clean the piston cooling jets and inspect the piston cooling jets for damage. Ensure that the valve is free to move within each piston cooling jet. Replace any damaged piston cooling jets. The procedure for checking that the alignment of the piston cooling jets is described in Specifications, "Piston Cooling Jet Alignment" for more information.
If the crankshaft is installed, use Tooling (A) to rotate the crankshaft in order to access the mounting flange for the piston cooling jet.
Install a new O-ring seal (3) (not shown) onto piston cooling jet (2).
Install piston cooling jet (2) into the oil passage in the cylinder block. Note: Ensure that the piston cooling jet is correctly installed into the oil passage in the cylinder block before tightening the bolt.
Install bolt (1). Tighten the bolt to a torque of 9 N m (80 lb in).
Repeat Step 2 through Step 4 in order to install the remaining piston cooling jets. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install" for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
D8N TRACTOR 9TC00001-UP (MACHINE) POWERED BY 3406 ENGINE
D8N TRACTOR 1XJ00001-UP (MACHINE) POWERED BY 3406 ENGINE


Parts hose Caterpillar catalog:

5P1442 HOSE
120B, 120G, 120H, 120H ES, 120H NA, 120M, 120M 2, 12G, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H NA, 140B, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 215, ...
9S2592 HOSE
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3508, 511, 521, 522, 532, 541, 551, 552, 578, 621E, 627E, 631C, 657E, 65E, 75E, 834B...
6N3246 HOSE AS
16H NA, 245, 3208, 3406, 3406E, 3456, 572R II, 578, 621B, 621E, 621R, 623E, 627E, 633D, 637D, 637E, 824C, 826C, 980C, C-15, C-16, C15, C18, CX31-C13I, CX31-C15I, CX35-P800, D7R II, D8N, TH35-C15I
4P0902 HOSE AS
578, 583R, 587R, 735, 740, C-10, C-12, C-15, C-16, C-18, C15, C16, C18, CX31-C15I, CX35-P800, D8N, D8R, D8R II, TH35-C15I, TH35-C15T
6N4447 HOSE AS
16G, 16H NA, 245, 578, 824G, 825G, 826C, 826G, 980G, C-10, C-12, D8N
7T3158 HOSE AS
12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, AP-1000, AP-1050, CB-22, D7H, D8N, M318C, M318C MH, M318D MH, M322C, M322D MH
9G0682 HOSE AS
578, 583R, 587R, 983B, D8N, D8R
8W3188 HOSE AS
784B, 789, 789B, 910E, 966G, 966G II, D10N, D10R, D8N, D9L, IT12B, IT14B, IT14F
7T9340 HOSE AS
D8N, D8R, D8R II
7T9341 HOSE AS
D8N, D8R, D8R II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.