AVSPARE.COM
parts catalog

HOUSING-PISTON 3534999 - Caterpillar



3534999 HOUSING-PISTON Caterpillar parts AD55, AD55B, AD60 HOUSING
Rating:
57
Alternative (cross code) number:
CA3534999
353-4999
3534999
Caterpillar 3534999 HOUSING-PISTON
Weight: 165 pounds 75 kg.

Buy HOUSING-PISTON 3534999 Caterpillar genuine, new aftermarket tractor parts with delivery
UNDERGROUND ART TRUCK,

Compatible equipment models: 3534999:

UNDERGROUND ART TRUCK  AD55   AD55B   AD60   Caterpillar
Number on catalog scheme: 14
 
  For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 372-6054 Driver As. 1
B 311-2290 Piston Installer 1
C 175-5507 Nitrogen Charging Group 1
Prior to assembly of the accumulator, coat the inside surface of the accumulator with a film of clean hydraulic oil.
Illustration 1 g03732913
Install wear band (14) and piston seal (15) onto piston (13). Lubricate piston seal (15) and wear band (14) with the lubricant that is being sealed.
Illustration 2 g03732909
View from oil side of the accumulator.
Use Tooling (B) in order to install piston (13) in the same end as the gas valve. Note: Install piston (13) just far enough that cap (9) will push against piston (13) as cap (9) is installed. Doing so will ensure piston (13) is firmly against cap (9).
Illustration 3 g03732864
Install O-ring seal (12) on end cap (11). Lubricate O-ring seal (12) with the lubricant that is being sealed.
Illustration 4 g03732848
Install accumulator (8) in a suitable device that will prevent the accumulator from rotating. Use Tooling (A) to install end cap (11) in accumulator (8) using the orientation marks established during disassembly. Note: Do not use air tools to tighten end cap (11).
Illustration 5 g03732845
Install O-ring seal (10) on end cap (9). Lubricate O-ring seal (10) with the lubricant that is being sealed.
Illustration 6 g03732759
Reposition accumulator (8) in order to install end cap (9). Use Tooling (A) in order to install end cap (9) using the orientation marks established during the disassembly. Note: As specified in Step 3 end cap (9) should make contact with the piston as it is installed. This will insure the piston is seated against end cap (9) at the start of the nitrogen charging procedure.Note: Do not use air tools to tighten end cap (9).
Illustration 7 g03732744
Install gas valve (3). Tighten the base of gas valve (3) in to the accumulator to a torque of 25 5N m (221 44lb in). Install bracket (4) to the orientation established during the disassembly.
Secure accumulator (8) in an upright position with gas valve (3) facing up. Fasten Tooling (C) onto gas valve (3). Refer to Special Instruction, REHS5464, "Accumulator Discharging and Charging Procedures" for the correct charging procedure. Charge the nitrogen to the following pressure 138 kPa (20 psi).
With Tooling (C) still fastened to gas valve (3) release the nitrogen charge. Then charge once more to the following pressure 138 kPa (20 psi). This purging process will help eliminate any atmospheric gas remaining inside the accumulator.
Illustration 8 g03732735
Install cap (2) on gas valve (3).
Illustration 9 g03732728
Install guard (1).
Illustration 10 g03732750
Install bracket (5) on the accumulator using the orientation marks established during the disassembly. Install fitting assembly (6). Install sensor assembly (7). Tighten sensor assembly (7) to the following torque 62 6 N m (46 4 lb ft). End By:
Install Accumulator (Make Up).

Caterpillar parts catalog:

Caterpillar parts catalog
AD55 Underground Articulated Truck GNW00001-UP (MACHINE) POWERED BY C18 Engine
AD55 Underground Articulated Truck DNW00001-UP (MACHINE) POWERED BY C18 Engine
AD55B Underground Articulated Truck JNW00001-UP (MACHINE) POWERED BY C27 Engine
AD60 Articulated Underground Truck KNW00001-UP (MACHINE) POWERED BY C27 Engine
AD60 Underground Articulated Truck NNW00001-UP (MACHINE) POWERED BY C27 Engine


Parts housing Caterpillar catalog:

7T3279 HOUSING AS
120G, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 1673C, 16G, 16H, 16H NA, 16M, 215B,...
7T3974 HOUSING AS-DRIVE
1090, 1190, 1190T, 120G, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H NA...
7T3973 HOUSING AS-LEVER
120G, 12G, 140G, 140H, 143H, 160H, 163H, 1673C, 16G, 215B, 245, 3176, 3176B, 3176C, 3196, 3208, 322C, 325, 325 L, 325C, 330 L, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, ...
1615718 HOUSING-WATER PUMP
24M, 3406E, 3456, 385B, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 824C, 824G, 824G II, 824H, 825G II, 82...
2234739 HOUSING-FLYWHEEL
AD45B, AD55, C15, C15 I6, C18 I6, TH35-C15T
3215967 HOUSING GP-FILTER
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16M...
6Y8675 HOUSING AS
631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, AD55B, AD60
3P8186 HOUSING-SCREEN
769C, 773B, 824C, 826C, 834B, 980C, 988B, 992C, AD45B, AD55, AD55B, AD60, D44B, D550B, PM-565, PM-565B
5S4326 HOUSING-SCREEN
AD30, AD55, D250D, D300D, D350E, D350E II, D400, D400E, D400E II, D40D
2111299 HOUSING AS
AD45, AD45B, AD55, AE40 II
4Z6228 HOUSING AS
365C L MH, 385C L MH, 5110B
1513051 HOUSING
AD55, AD55B, AD60
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.