AVSPARE.COM
parts catalog

Housing, gear 70000211 - Caterpillar



70000211 Housing, gear Caterpillar parts Housing
Rating:
75
Alternative (cross code) number:
CA70000211
7000-0211
70000211
Caterpillar 70000211 Housing, gear

Buy Housing, gear 70000211 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 1
 
  For full view, you need register

Information:

Disassembly Procedure
Table 1
Required Tools
Tool Qty Part Number Description
A 1 1P-1857 Retaining Ring Pliers
B 1 6V-2012 Micrometer Depth gauge (Inches)
C 1 6V-7030 Micrometer Depth gauge (Metric) Start By:
Remove the travel pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Travel) - Remove".
Make sure that the outside of the travel pilot valve is thoroughly clean prior to disassembly. Replace all seals with new seals. Note: During disassembly of the travel pilot valve, put identification marks on all of the parts for assembly purposes.
Illustration 1 g00800978
Use a suitable sized Allen wrench to remove setscrew (1) from pedal (2).
Illustration 2 g00800979
Remove camshaft (6) and pedal (2) from cover (4). Note: The setscrews in pedal (2) must be installed in the original position.
Use Tool (B) or Tool (C) to measure the two setscrews in pedal (2). Take the measurement from the bottom surface of pedal (2) to the end of the setscrew. Record the dimensions for assembly purposes.
Loosen the two nuts, and remove the two remaining setscrews from pedal (2).
Remove socket head bolts (3). Remove cover (4) from housing (5).
Illustration 3 g00800990
Remove two bushings (7) from cover (4).
Illustration 4 g00800991
Remove plug assembly (11), spring (10), spring (9), seat (8) and three balls (12) from housing (5).
Illustration 5 g00801042
Use the following procedure to disassemble plug assembly (11).
Remove piston (13) from push rod (17). Remove push rod (17) from plug (15).
Remove O-ring seal (14) and packing (16) from plug (15).
Illustration 6 g00536462
Illustration 7 g00801043
Use Tool (A) to remove retaining ring (18) from housing (15). Remove bushing (19), spool assembly (20) and spring (21) from housing (5).
Use the following procedure to disassemble spool assembly (20).
Illustration 8 g00801044
Hold spool assembly (20) in one hand. Compress seat (22) in order to remove two locking collars (23).
Remove seat (22), spring (24), washer (25) and seat (26) from spool (27).
Disassemble the remainder of the travel pilot valve. Follow the procedure in Steps 2 through 11.b.

Caterpillar parts catalog:

Caterpillar parts catalog
CP-323 VIBRATORY COMPACTOR 6JD00001-00065 (MACHINE) POWERED BY 4219D ENGINE


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.