AVSPARE.COM
parts catalog

HOUSING, WATER DISTRIBUTION 7095422C1 - Caterpillar



7095422C1 HOUSING, WATER DISTRIBUTION Caterpillar parts HOUSING
Rating:
76
Alternative (cross code) number:
CA7095422C1
70954-22C1
7095422C1
Caterpillar 7095422C1 HOUSING, WATER DISTRIBUTION

Buy HOUSING, WATER DISTRIBUTION 7095422C1 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 1 g00934869
Schematic of the Oscillation Lock System (1) Oscillation lock switch (2) Accelerator pedals (3) Combination valve (4) IQAN (5) Oscillation lock cylinder (6) Pressure reducing valve (7) Knob (8) Oscillation lock valve (A) Pump pressure (AA) Pressure tap
Illustration 2 g00925974
View Near the Articulation Joint of the Machine (5) Oscillation lock cylinder. (7) Knob. (8) Oscillation lock valve. The oscillation lock is automatically applied when the accelerator pedals are released with the engine on. The oscillation lock can be applied when the machine is moving by pressing and holding the oscillation lock switch. The oscillation lock switch is a momentary switch.UNLOCKED Position
When the accelerator pedal is depressed and the oscillation lock switch is not depressed, the valve spool in oscillation lock valve (8) is in the DOWN position with the engine shutoff. Pressure oil flows from the implement pump to pressure reducing valve (6). Pressure reducing valve (6) reduces the oil pressure below the standby pressure of the pump.Note: The pressure setting of pressure reducing valve (6) is adjustable. The pressure setting of pressure reducing valve (6) can be measured from pressure tap (AA) .The reduced pressure oil then flows through the oscillation lock valve to the oscillation lock cylinder. Oil flow to the cylinder prevents cavitation in the cylinder when the oscillation lock valve moves to the LOCKED position.As the machine travels over terrain, oil will flow between the head end of oscillation lock cylinder (5), rod end of oscillation lock cylinder (5), and the hydraulic tank.LOCKED Position
When the accelerator pedal is released or the oscillation lock switch is pressed, current is sent to the solenoid. The valve spool in oscillation lock valve (8) is in the UP position. No oil will flow to the head end or the rod end of oscillation lock cylinder (5). The machine will not oscillate.Also, the oscillation lock can be manually applied with knob (7). The knob overrides the oscillation lock switch. When the knob is pushed into the UP position the oscillation lock is applied. Normally, the oscillation lock is manually applied for servicing and transporting the machine.


Parts housing Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.