HYDRAULIC ARRANGEMENT-3 VALVE 1246493 - Caterpillar

Table 3
Cat Specification for Distillate Fuel for Nonroad Diesel Engines
Specifications Requirements ASTM Test ISO Test
Aromatics 35% maximum "D1319" "3837"
Ash 0.01% maximum (weight) "D482" "6245"
Carbon Residue on 10% Bottoms 0.35% maximum (weight) "D524" "4262"
Cetane Number (1) 40 minimum (DI engines) "D613"
or
"D6890" "5165"
35 minimum (PC engines)
Cloud Point The cloud point must not exceed the lowest expected ambient temperature. "D2500" "3015"
Copper Strip Corrosion No. 3 maximum "D130" "2160"
Distillation 10% at 282 °C (540 °F)
maximum "D86" "3405"
90% at 360 °C (680 °F)
maximum (2)
90% at 350 °C (662 °F)
maximum (2)
Flash Point legal limit "D93" "2719"
Thermal Stability Minimum of 80% reflectance after aging for 180 minutes at 150 °C (302 °F) "D6468" No equivalent test
API Gravity (3) 30 minimum "D287" No equivalent test
45 maximum
Pour Point 6 °C (10 °F) minimum below ambient temperature "D97" "3016"
Sulfur (4) "D5453"
or
"D2622" "20846"
or
"20884"
Kinematic Viscosity 1.4 cSt minimum and 20.0 cSt maximum as delivered to the fuel injection pumps - -
1.4 cSt minimum and 4.5 cSt maximum as delivered to the rotary fuel injection pumps
Water and Sediment 0.05% maximum "D1796" or "D2709" "3734"
Water 0.05% maximum "D6304" No equivalent test
Sediment 0.05% maximum (weight) "D473" "3735"
Gums and Resins (5) 10 mg per 100 mL maximum "D381" "6246"
Lubricity 0.52 mm (0.0205 inch) maximum at 60 °C (140 °F) "D6079" No equivalent test
Cleanliness (6) "D7619" "4406"
(1) Alternatively, to ensure a minimum cetane number of 35 (PC engines), and 40 (DI engines), distillate diesel fuel should have a minimum cetane index of 37.5 (PC engines), and 44.2 (DI engines) when the "ASTM D4737-96a" test method is used. A fuel with a higher cetane number may be required for operation at a higher altitude or in cold weather.
(2) Distillation of 90% at 350°C (662°F) maximum is recommended for Tier 4 engines and preferred for all engines. Distillation of 90% at 350°C (662°F) is equivalent to 95% at 360°C (680°F).Distillation of 90% at 360°C (680°F) maximum is acceptable for Pre-Tier 4 engines.
(3) Via standards tables, the equivalent kg/m3 (kilograms per cubic meter) using the "ASTM D287" test method temperature of 15.56° C (60° F) for the minimum API gravity of 30 is 875.7 kg/m3, and for the maximum API gravity of 45 is 801.3 kg/m3.
(4) Follow the federal, state, local, and other governing authorities for guidance concerning the fuel requirements in your area.
(5) Follow the test conditions and procedures for gasoline (motor).
(6) Recommended cleanliness level for fuel as dispensed into machine or engine fuel tank is "ISO 18/16/13" or cleaner per "ISO 4406" or "ASTM D7619". Refer to the “Contamination Control” section in this Special Publication.For more information, refer to Special Publication, SEBU7003, "Cat 3600 Series and Cat C280 Series Diesel Engine Fluids Recommendations".Grease
Table 4
Cat Grease
Grease Cat Multipurpose Grease
Cat Marine Multipurpose Grease
Cat Advanced 3Moly Grease
Cat Ultra 5Moly Grease (multiple NLGI Grades)
Cat Desert Gold Grease
Cat Arctic Platinum Grease
Cat High Speed Ball Bearing Grease
Cat Hammer Paste
Cat White Assembly Grease For more information, refer to Special Publication, SEBU7003, "Cat 3600 Series and Cat C280 Series Diesel Engine Fluids Recommendations".