parts catalog

INCH HOSE 0000007 - Caterpillar

0000007 INCH HOSE Caterpillar parts D333A INCH
Alternative (cross code) number:
Caterpillar 0000007 INCH HOSE
Weight: 1 pounds 0 kg.

Buy INCH HOSE 0000007 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 0000007:

MARINE ENGINE  D333A   Caterpillar
Number on catalog scheme: None
  For full view, you need register


Removal Procedure
Start By:
Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove" for the correct procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00725265
Remove bolts (1), the washers and the flexible coupling from the machine. Remove O-ring seal (2) from the driver of the flexible coupling.
Illustration 2 g00725273
Remove bolts (3) and the washers. Remove joint assembly (4) from driver (5). Installation Procedure
Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the same sealing properties as a new O-ring. A reconditioning procedure should not be degraded because of a low cost component such as an O-ring or a gasket. Use 1U-6396 O-Ring Assembly Compound during the assembly procedure.
Illustration 3 g00725273
Install joint assembly (4) to driver (5) with the washers and bolts (3). Tighten bolts (3) to a torque of 270 40 N m (199 30 lb ft).
Illustration 4 g00725265
Install O-ring seal (2) to the driver. Install the flexible coupling with the washers and bolts (1). Tighten bolts (3) to a torque of 55 10 N m (41 7 lb ft). End By:
Install the drive pump. Refer to Disassembly and Assembly, "Pump Drive - Install" for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
D333 MARINE ENGINE 59B00001-00662

Parts inch Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.