parts catalog

INSTALLATION AR-ENGINE 3535026 - Caterpillar

Alternative (cross code) number:
Caterpillar 3535026 INSTALLATION AR-ENGINE

Buy INSTALLATION AR-ENGINE 3535026 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3535026:

WHEEL LOADER  966K   Caterpillar
  For full view, you need register


2. Disconnect supply hose (3) and both the left and right side brake supply lines (2) from the slack adjuster (1).3. Remove the two bolts that fasten the slack adjuster to the manifold, and remove the slack adjuster. The following steps are for installation of the slack adjuster.4. To install, put slack adjuster (1) in position, and install the two bolts that hold it. Connect hose (3) and lines (2) to the slack adjuster.5. Remove the air from (bleed) the rear brakes. See Testing And Adjusting.Disassemble Slack Adjuster
START BY:a. remove slack adjuster
Housing assemblies (1) and (3) hold springs (4) under compression. To prevent possible personal injury, use caution when the housing assemblies are removed.
1. Turn housing assemblies (1) and (3) counterclockwise to remove them from base (2). 2. Remove spring (4) from between each housing and the base. Remove fitting (5) from housings (1) and (3). 3. Remove piston (6) from each housing. 4. Remove O-ring seal (7) from each piston (6). 5. Remove O-ring seals (8) and the fitting from base (2).Assemble Slack Adjuster
1. Make sure all parts are clean and free of foreign material. Inspect the condition of all O-ring seals, and make replacements if necessary. 2. Install O-ring seal (1) on each piston (2). 3. Install piston (2) in each housing (3). 4. Install O-ring seal (5) on each fitting (4), and install a fitting on each housing (3). 5. Install fitting and O-ring seals (6) in base (7). 6. Install spring (8) and housing (3) on each side of base (7).END BY:a. install slack adjuster

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
966K Series XE Wheel Loader NGX00001-UP (MACHINE) POWERED BY C9.3 Engine

Parts installation Caterpillar catalog:

966M, 966M XE, 972M, 972M XE, 980M, 982M
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.