AVSPARE.COM
parts catalog

INSTALLATION AR-ENGINE 3967772 - Caterpillar



3967772 INSTALLATION AR-ENGINE Caterpillar parts 902C INSTALLATION
Rating:
13
Alternative (cross code) number:
CA3967772
396-7772
3967772
Caterpillar 3967772 INSTALLATION AR-ENGINE

Buy INSTALLATION AR-ENGINE 3967772 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3967772:

COMPACT WHEEL LOADER  902C   Caterpillar
  For full view, you need register

Information:

Required Parts
Table 1
Required Parts List    
Item     Qty     Part Number     Description    
7     8     371-6254     Blocks    
8     1     371-6259     Plate As    
9     24     8T-4183     Bolts    
10     24     198-4778     Hard Washers    
11     1     371-6258     Plate As    Procedure to Update the Truck Hood Group
Use the following procedure to update 272-3282 Truck Hood Gp :
Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can kill. Read and understand the manufacturer's instruction and your employer's safety practices. Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area. Wear correct eye, ear and body protection. Do not touch live electric parts.Refer to the American National Standard Z49.1, "Safety in Welding and Cutting" published by the American Welding Society, 2501 N.W. 7th Street, Miami, Florida 33125: OSHA Safety and Health Standards, 29 CFR 1910, available from U.S. Dept. of Labor, Washington D.C. 20210.
Move the machine to a smooth horizontal location. Move the machine away from any machines that are working and away from any personnel.
Move the transmission control to the NEUTRAL position. Stop the engine.
Permit only one operator on the machine. Either keep other personnel away from the machine, or keep other personnel in the sight of the operator.
Activate the parking brakes.
Place blocks in front of the wheels and behind the wheels.
Fully lift the dump body of the truck. Install retaining cable for the dump body.
Make sure that the transmission rotary selector spool is in the NEUTRAL position.
Illustration 1 g02646942
Illustration 2 g02646943
Detail of area A
Remove the mounting hardware and plate assembly (1), plate assembly (2), plate assembly (3), and plate assembly (4). Save the mounting hardware and plate assemblies.
Remove the mounting hardware and plate assembly (5) on both the sides. Discard the parts.
Illustration 3 g02646985
Remove plates (6) and discard the parts.
Illustration 4 g02646997
Top view (A) Dimension is 3421 mm (134.7 inch) (B) Dimension is 478 3 mm (18.8 0.1 inch) (C) Dimension is 418 3 mm (16.5 0.1 inch) (D) Dimension is 208.9 3.0 mm (8.22 0.12 inch) (E) Dimension is 209 3 mm (8.2 0.1 inch) (F) Dimension is 2026.7 mm (79.8 inch) (G) Dimension is 2025.6 mm (79.75 inch) (W1) Round fillet weld 6.0 mm (0.24 inch)
Weld eight new blocks (7) to the frame assembly as per dimensions shown in Illustration 4. Refer the above reference.
Illustration 5 g02647016
Install new plate assembly (8) with 12 new

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
902C Compact Wheel Loader W5T00001-UP (MACHINE) POWERED BY C2.4 Engine


Parts installation Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.