AVSPARE.COM
parts catalog

JOYSTICK GP 3599581 - Caterpillar



3599581 JOYSTICK GP Caterpillar parts JOYSTICK
Rating:
41
Alternative (cross code) number:
CA3599581
359-9581
3599581
Caterpillar 3599581 JOYSTICK GP
Weight: 1 pounds 0 kg.

Buy JOYSTICK GP 3599581 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove water seals (1) from the spacer plate. 2. Install six 3/8" - 16 NC forcing screws (2) in spacer plate (5). Tighten the screws evenly until the spacer plate (5) is free of the dowels. Remove gasket.3. Remove the O-ring seals from locations (3) and (4) under the spacer plate.Install Spacer Plates
1. Make sure the spacer plate and the machined surface of the cylinder block are clean and free of dirt and foreign material.
Both surfaces of the spacer plate gasket and the top of the cylinder block must be clean. Do not use a gasket adhesive on these surfaces.
2. Put a new gasket (2) over the dowels and install O-ring seals (1) on the cylinder block. 3. Install spacer plate (3).4. Install new water seals in the spacer plate.5. Check the cylinder liner projection. See "Install Cylinder Liners" in the Disassembly and Assembly.End By:a. install cylinder heads


Parts joystick Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.