AVSPARE.COM
parts catalog

KICKOUT & POSITIONER GP 3967834 - Caterpillar



3967834 KICKOUT & POSITIONER GP Caterpillar parts 903C KICKOUT
Rating:
74
Alternative (cross code) number:
CA3967834
396-7834
3967834
Caterpillar 3967834 KICKOUT & POSITIONER GP

Buy KICKOUT & POSITIONER GP 3967834 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3967834:

COMPACT WHEEL LOADER  903C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 2 g02715459
Automatic Retarder Control (ARC) (2) - Push the top half of the switch in order to select the ON position for the ARC system. The ARC allows the machine to maintain a constant downhill speed. Push the bottom half of the switch in order to select the OFF position for the ARC system. When the proper gear is selected during ARC operation, vehicle speed and engine speed will be automatically regulated. If necessary, use the manual retarder control in order to apply more retarding force during the operation of ARC.The ARC should remain in the ON position during normal operation. When you place switch (2) in the OFF position, the ARC will not control engine speed during normal operation. However, if the engine speed becomes too high, the ARC will perform engine overspeed protection.Engine Overspeed Protection
This machine is equipped with automatic engine overspeed protection. If the engine speed reaches 2475 rpm, the ARC system will automatically engage, regardless of the position of the ARC switch. In order to prevent further engine overspeed, the transmission will upshift one gear if the engine speed reaches 2750 rpm and the transmission is in the same actual gear as the selected gear on the transmission control.Retarding Guidelines (Film)
Retarding performance charts provide an indication of the energy absorption capability of a given truck powertrain on a specified continuous, and less than 610 m (2000 ft) decline. Retarding performance charts serve to indicate the correct transmission gear selection and ground speed that should be used on a given grade to avoid situations which may result in machine overspeed and damage to the machine. Retarding performance charts do not give an indication of the ability of the truck to stop or the ability of the truck to remain stationary on the grades that are listed on the chart.
The maximum operating weight of a loaded 777G Off-Highway Truck is 164654 kg (363000 lb).
Illustration 3 g02753098
The film for retarding guidelines is located inside the cab.
Maximum Operating Weight - The maximum operating weight of a loaded Off-Highway Truck
Transmission Gear for the Downgrade - The selected gear for downhill travel
Downhill Slope Percentage - The percentage value of the slope for downhill travel
Distance of the Downgrade - The distance of the slope for downhill travelThe retarding capabilities that are listed on this film are based on an ambient temperature of 32 °C (90 °F).The actual retarding capabilities for each gear will vary depending on the following conditions: outside temperatures, rolling resistance, load, the condition of the cooling system, tire size and altitude.Retarding Information and Conditions
Selection of the proper gear is essential for effective operation of the retarder system. Refer to the film for retarding guidelines in order to select the proper gear.Select the proper gear on the transmission control before you start down the grade. The actual gear should also match the selected gear before you start down the grade. For more information on the transmission control, refer to Operation and Maintenance Manual, "Operator Controls".When the film does not address

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine


Parts kickout Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.