parts catalog

KIT-CYLINDER 3156724 - Caterpillar

3156724 KIT-CYLINDER Caterpillar parts KIT
Alternative (cross code) number:
Caterpillar 3156724 KIT-CYLINDER
Weight: 5 pounds 2 kg.

Buy KIT-CYLINDER 3156724 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Assembly Procedure
Table 1
Required Tools
Item Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound 1
B - Loctite 242 1
Illustration 1 g02476352
Install ring (18) and spring pin (17) to shaft (15).
Illustration 2 g02476374
Partially install spring pin (16) into shaft (15).
Illustration 3 g02476349
Install spring pin (16) and shaft (15) to steering control (1).
Illustration 4 g02476375
Install plate (14) to steering control (1).
Illustration 5 g02476376
Install bolts (4) and plate (12) on top of plate (14).
Install the washers and nuts (13).
Apply Tooling (A) to shaft (15).
Illustration 6 g02476377
Install spacer (11) and ring (10). Apply Tooling (A) to spacer (11).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 7 g02476379
Install the key, spring (9), and torque arm (7).
Install tubes (8).
Apply Tooling (A) to the top of torque arm (7).
Illustration 8 g02476344
Install dowel pins (6) to plate (5).
Illustration 9 g02476342
Install plate (5) and tighten bolts (4).
Illustration 10 g02476388
(X) Orient the shaft to 11 degrees.
Illustration 11 g02476341
Install the O-ring seal to position sensor (2).
Verify that the shaft is orientated to dimension (X). Apply Tooling (B) to screws (3). Install position sensor (2), the washers, and screws (3) to steering control (1). Tighten screws (3) to a torque of 1 0.25 N m (0.74 0.18 lb ft). End By:
Install the steering control. Refer to Disassembly and Assembly, "Steering Column - Install".

Parts kit Caterpillar catalog:

3156670 KIT-
3156667 KIT-
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.